User:TentativeTypist/sandbox

This is the user sandbox of TentativeTypist. A user sandbox is a subpage of the user's user page. It serves as a testing spot and page development space for the user and is not an encyclopedia article. Create or edit your own sandbox here. Other sandboxes: Main sandbox | Template sandbox Finished writing a draft article? Are you ready to request review of it by an experienced editor for possible inclusion in Wikipedia? Submit your draft for review!

Derivative

The derivative of ${\displaystyle f(x)}$ at the point ${\displaystyle x=a}$, denoted ${\displaystyle f'(a)}$,^[1] is defined as the slope of the tangent to ${\displaystyle (a,f(a))}$.^[2] In order to gain an intuition for this definition, one must first be familiar with finding the slope of a linear equation, written in the form ${\displaystyle y=mx+b}$. The slope of an equation is its steepness. It can be found by picking any two points and dividing the change in ${\displaystyle y}$ by the change in ${\displaystyle x}$, meaning that ${\displaystyle {\text{slope }}={\tfrac {{\text{change in }}y}{{\text{change in }}x}}}$. As an example, the graph of ${\displaystyle y=-2x+13}$ has a slope of ${\displaystyle -2}$, as shown in the diagram below:

${\displaystyle {\frac {{\text{change in }}y}{{\text{change in }}x}}={\frac {-6}{+3}}=-2}$

For brevity, ${\displaystyle {\frac {{\text{change in }}y}{{\text{change in }}x}}}$ is often written as ${\displaystyle {\frac {\Delta y}{\Delta x}}}$, with ${\displaystyle \Delta }$ being the Greek letter Delta, meaning 'change' or 'increment'.^[3] The slope of a linear equation is constant, meaning that the steepness is the same everywhere. However, many graphs, including ${\displaystyle y=x^{2}}$, vary in their steepness. This means that one can no longer pick any two arbitrary points and compute the slope. Instead, the slope of the graph is defined using a tangent line—a line that 'just touches' a particular point. The slope of a curve at a particular point is defined as the slope of the tangent to that point. For example, ${\displaystyle y=x^{2}}$ has a slope of ${\displaystyle 4}$ at ${\displaystyle x=2}$, because the slope of the tangent line to that point is equal to ${\displaystyle 4}$:

The derivative of a function is defined as the slope of this tangent line.^{[Note 1]} Even though the tangent line only touches a single point, it can be approximated by a line that goes through two points. This is known as a secant line. If the two points that the secant line goes through are close together, then the secant line closely resembles the tangent line, and, as a result, its slope is also very similar:

The advantage of using a secant line is that its slope can be calculated directly. Consider the two points on the graph ${\displaystyle (x,f(x))}$ and ${\displaystyle (x+\Delta x,f(x+\Delta x))}$, where ${\displaystyle \Delta x}$ is a small number. As before, the slope of the line passing through these two points can be calculated with the formula ${\displaystyle {\text{slope }}={\frac {\Delta y}{\Delta x}}}$. This gives

${\displaystyle {\text{slope}}={\frac {f(x+\Delta x)-f(x)}{\Delta x}}}$

As ${\displaystyle \Delta x}$ gets closer and closer to ${\displaystyle 0}$, the slope of the secant line gets closer and closer to the slope of the tangent line. This is formally written as^[3]

${\displaystyle \lim _{\Delta x\to 0}{\frac {f(x+\Delta x)-f(x)}{\Delta x}}}$

The above expression means 'as ${\displaystyle x}$ gets closer and closer to 0, the slope of the secant line gets closer and closer to a certain value'. The value that is being approached is the derivative of ${\displaystyle f(x)}$; this can be written as ${\displaystyle f'(x)}$.^[1][4] If ${\displaystyle y=f(x)}$, the derivative can also be written as ${\displaystyle {\tfrac {dy}{dx}}}$, with ${\displaystyle d}$ representing an infinitesimal change. For example, ${\displaystyle dx}$ represents an infinitesimal change in x.^{[Note 2]} In summary, if ${\displaystyle y=f(x)}$, then the derivative of ${\displaystyle f(x)}$ is^[3]

${\displaystyle {\frac {dy}{dx}}=f'(x)=\lim _{\Delta x\to 0}{\frac {f(x+\Delta x)-f(x)}{\Delta x}}}$

provided such a limit exists.^{[4][Note 3]} Differentiating a function using the above definition is known as differentiation from first principles. Here is a proof, using differentiation from first principles, that the derivative of ${\displaystyle y=x^{2}}$ is ${\displaystyle 2x}$:

${\displaystyle {\begin{aligned}{\frac {dy}{dx}}&=\lim _{\Delta x\to 0}{\frac {f(x+\Delta x)-f(x)}{\Delta x}}\\&=\lim _{\Delta x\to 0}{\frac {(x+\Delta x)^{2}-x^{2}}{\Delta x}}\\&=\lim _{\Delta x\to 0}{\frac {x^{2}+2x\Delta x+(\Delta x)^{2}-x^{2}}{\Delta x}}\\&=\lim _{\Delta x\to 0}{\frac {2x\Delta x+(\Delta x)^{2}}{\Delta x}}\\&=\lim _{\Delta x\to 0}2x+\Delta x\\\end{aligned}}}$

As ${\displaystyle \Delta x\to 0}$, ${\displaystyle 2x+\Delta x\to 2x}$. Therefore, ${\displaystyle {\tfrac {dy}{dx}}=2x}$. This proof can be generalised to show that ${\displaystyle {\tfrac {d(ax^{n})}{dx}}=anx^{n-1}}$, if ${\displaystyle a}$ and ${\displaystyle n}$ are constants. This is known as the power rule. For example, ${\displaystyle {\tfrac {d}{dx}}(5x^{4})=5(4)x^{3}=20x^{3}}$. However, many other functions cannot be differentiated as easily as polynomial functions, meaning that sometimes further techniques are needed to find the derivative of a function. These techniques include the chain rule, product rule, and quotient rule. Other functions cannot be differentiated at all, giving rise to the concept of differentiability.

Derivative

The derivative of ${\displaystyle f(x)}$ at the point ${\displaystyle x=a}$, denoted ${\displaystyle f'(a)}$,^[1] is defined as the slope of the tangent to ${\displaystyle (a,f(a))}$.^[5] In order to gain an intuition for this definition, one must first be familiar with finding the slope of a linear equation, written in the form ${\displaystyle y=mx+b}$. The slope of an equation is its steepness. It can be found by picking any two points and dividing the change in ${\displaystyle y}$ by the change in ${\displaystyle x}$, meaning that ${\displaystyle {\text{slope }}={\tfrac {{\text{change in }}y}{{\text{change in }}x}}}$. As an example, the graph of ${\displaystyle y=-2x+13}$ has a slope of ${\displaystyle -2}$, as shown in the diagram below:

${\displaystyle {\frac {{\text{change in }}y}{{\text{change in }}x}}={\frac {-6}{+3}}=-2}$

For brevity, ${\displaystyle {\frac {{\text{change in }}y}{{\text{change in }}x}}}$ is often written as ${\displaystyle {\frac {\Delta y}{\Delta x}}}$, with ${\displaystyle \Delta }$ being the Greek letter Delta, meaning 'change' or 'increment'.^[3] The slope of a linear equation is constant, meaning that the steepness is the same everywhere. However, many graphs, including ${\displaystyle y=x^{2}}$, vary in their steepness. This means that one can no longer pick any two arbitrary points and compute the slope. Instead, the slope of the graph is defined using a tangent line—a line that 'just touches' a particular point. The slope of a curve at a particular point is defined as the slope of the tangent to that point. For example, ${\displaystyle y=x^{2}}$ has a slope of ${\displaystyle 4}$ at ${\displaystyle x=2}$, because the slope of the tangent line to that point is equal to ${\displaystyle 4}$:

The derivative of a function is defined as the slope of this tangent line.^{[Note 4]} Even though the tangent line only touches a single point, it can be approximated by a line that goes through two points. This is known as a secant line. If the two points that the secant line goes through are close together, then the secant line closely resembles the tangent line, and, as a result, its slope is also very similar:

The advantage of using a secant line is that its slope can be calculated directly. Consider the two points on the graph ${\displaystyle (x,f(x))}$ and ${\displaystyle (x+\Delta x,f(x+\Delta x))}$, where ${\displaystyle \Delta x}$ is a small number. As before, the slope of the line passing through these two points can be calculated with the formula ${\displaystyle {\text{slope }}={\frac {\Delta y}{\Delta x}}}$. This gives

${\displaystyle {\text{slope}}={\frac {f(x+\Delta x)-f(x)}{\Delta x}}}$

As ${\displaystyle \Delta x}$ gets closer and closer to ${\displaystyle 0}$, the slope of the secant line gets closer and closer to the slope of the tangent line. This is formally written as^[3]

${\displaystyle \lim _{\Delta x\to 0}{\frac {f(x+\Delta x)-f(x)}{\Delta x}}}$

The above expression means 'as ${\displaystyle x}$ gets closer and closer to 0, the slope of the secant line gets closer and closer to a certain value'. The value that is being approached is the derivative of ${\displaystyle f(x)}$; this can be written as ${\displaystyle f'(x)}$.^[1][4] If ${\displaystyle y=f(x)}$, the derivative can also be written as ${\displaystyle {\tfrac {dy}{dx}}}$, with ${\displaystyle d}$ representing an infinitesimal change. For example, ${\displaystyle dx}$ represents an infinitesimal change in x.^{[Note 5]} In summary, if ${\displaystyle y=f(x)}$, then the derivative of ${\displaystyle f(x)}$ is^[3]

${\displaystyle {\frac {dy}{dx}}=f'(x)=\lim _{\Delta x\to 0}{\frac {f(x+\Delta x)-f(x)}{\Delta x}}}$

provided such a limit exists.^{[4][Note 6]} Differentiating a function using the above definition is known as differentiation from first principles. Here is a proof, using differentiation from first principles, that the derivative of ${\displaystyle y=x^{2}}$ is ${\displaystyle 2x}$:

${\displaystyle {\begin{aligned}{\frac {dy}{dx}}&=\lim _{\Delta x\to 0}{\frac {f(x+\Delta x)-f(x)}{\Delta x}}\\&=\lim _{\Delta x\to 0}{\frac {(x+\Delta x)^{2}-x^{2}}{\Delta x}}\\&=\lim _{\Delta x\to 0}{\frac {x^{2}+2x\Delta x+(\Delta x)^{2}-x^{2}}{\Delta x}}\\&=\lim _{\Delta x\to 0}{\frac {2x\Delta x+(\Delta x)^{2}}{\Delta x}}\\&=\lim _{\Delta x\to 0}2x+\Delta x\\\end{aligned}}}$

As ${\displaystyle \Delta x\to 0}$, ${\displaystyle 2x+\Delta x\to 2x}$. Therefore, ${\displaystyle {\tfrac {dy}{dx}}=2x}$. This proof can be generalised to show that ${\displaystyle {\tfrac {d(ax^{n})}{dx}}=anx^{n-1}}$, if ${\displaystyle a}$ and ${\displaystyle n}$ are constants. This is known as the power rule. For example, ${\displaystyle {\tfrac {d}{dx}}(5x^{4})=5(4)x^{3}=20x^{3}}$. However, many other functions cannot be differentiated as easily as polynomial functions, meaning that sometimes further techniques are needed to find the derivative of a function. These techniques include the chain rule, product rule, and quotient rule. Other functions cannot be differentiated at all, giving rise to the concept of differentiability.

Exponentiation

Defining exponentiation via logarithms

The meaning of ${\displaystyle a^{x}}$, where ${\displaystyle a}$ and ${\displaystyle x}$ are positive real numbers, can also come from natural logarithm. This avoids the difficulty surrounding the definition of ${\displaystyle a^{x}}$ for irrational ${\displaystyle x}$. First, we may define, for ${\displaystyle x>0}$,

${\displaystyle \log x=\int _{1}^{x}{\frac {1}{t}}dt}$

It can then be proven that ${\displaystyle \log x}$ satisfies the basic properties of logarithms, in particular ${\displaystyle \log a+\log b=\log ab}$. Then, ${\displaystyle \exp }$ can be defined as the inverse of ${\displaystyle \log }$, and ${\displaystyle e}$ can be defined as the number ${\displaystyle a}$ such that ${\displaystyle \log a=1}$.

Finally, ${\displaystyle a^{x}}$ can be defined as ${\displaystyle \exp(x\log a)}$. Since ${\displaystyle e^{x}=\exp(x\log e)=\exp(x)}$, ${\displaystyle a^{x}}$ can also be interpreted to mean ${\displaystyle e^{x\log a}}$. In any case, this approach sidesteps the issue surrounding the definition of ${\displaystyle a^{x}}$ for irrational ${\displaystyle x}$; in fact, ${\displaystyle a^{x}}$ has the same definition regardless of whether ${\displaystyle x}$ is a natural number, an integer, a rational number, or a real number.

Small-angle approximation

Algebraic

The Maclaurin series expansions of the main trigonometric functions are

${\displaystyle {\begin{aligned}\sin \theta &=\sum _{n=0}^{\infty }{\frac {(-1)^{n}}{(2n+1)!}}\theta ^{2n+1}\\&=\theta -{\frac {\theta ^{3}}{3!}}+{\frac {\theta ^{5}}{5!}}-{\frac {\theta ^{7}}{7!}}+\cdots \\[6pt]\cos \theta &=\sum _{n=0}^{\infty }{\frac {(-1)^{n}}{(2n)!}}\theta ^{2n}\\&=1-{\frac {\theta ^{2}}{2!}}+{\frac {\theta ^{4}}{4!}}-{\frac {\theta ^{6}}{6!}}+\cdots \theta \\[6pt]\tan \theta &=\sum _{n=1}^{\infty }{\frac {B_{2n}(-4)^{n}\left(1-4^{n}\right)}{(2n)!}}\theta ^{2n-1}\\&=\theta +{\frac {\theta ^{3}}{3}}+{\frac {2\theta ^{5}}{15}}+{\frac {17\theta ^{7}}{315}}+\cdots \\[6pt]\end{aligned}}}$

where θ is the angle in radians.

It is readily seen that the second most significant (third-order) term falls off as the cube of the first term; thus, even for a not-so-small argument such as 0.01, the value of the second most significant term is on the order of 0.000001, or 1/10000 the first term. One can thus safely approximate:

${\displaystyle \sin \theta \approx \theta }$

By extension, since the cosine of a small angle is very nearly 1, and the tangent is given by the sine divided by the cosine,

${\displaystyle \tan \theta \approx \sin \theta \approx \theta }$,

Overview

Unlike factoring by inspection, completing the square can be used to solve any quadratic equation. Consider the example

${\displaystyle x^{2}+10x=39\,.}$

In order to isolate for ${\displaystyle x}$, it helps to consider this problem geometrically. The first term, ${\displaystyle x^{2}}$ can be interpreted as the area of square with side length ${\displaystyle x}$. The second term, ${\displaystyle 10x}$ can be interpreted as the area of a rectangle with lengths ${\displaystyle 10}$ and ${\displaystyle x}$, or, as the combined area of two rectangles that have lengths ${\displaystyle 5}$ and ${\displaystyle x}$:

This diagram suggests that ${\displaystyle x^{2}+10x}$ is almost a perfect square with side length ${\displaystyle x+5}$. If we add ${\displaystyle 25}$ to both sides of the equation, then it becomes

${\displaystyle x^{2}+10x+25=64}$

The left-hand side of the equation can then be written as ${\displaystyle (x+5)^{2}}$, and so

${\displaystyle (x+5)^{2}=64}$

Notes