Search results
There is a page named "Solder joint" on Wikipedia
be joined and melting the solder, which is then allowed to cool and solidify, creating a strong and durable joint. Soldering is commonly used in the electronics...64 KB (8,893 words) - 11:50, 18 July 2024
wet the parts of the joint, where it adheres to and connects the pieces after cooling. Metals or alloys suitable for use as solder should have a lower...38 KB (4,923 words) - 17:09, 27 April 2024
Solder paste is used in the manufacture of printed circuit boards to connect surface mount components to pads on the board. It is also possible to solder...17 KB (1,984 words) - 14:05, 12 June 2024
assembly is subjected to controlled heat. The solder paste reflows in a molten state, creating permanent solder joints. Heating may be accomplished by passing...13 KB (1,777 words) - 09:14, 6 July 2024
Solder is a metallic material that is used to connect metal workpieces. The choice of specific solder alloys depends on their melting point, chemical...69 KB (1,860 words) - 10:40, 3 June 2024- The solderability of a substrate is a measure of the ease with which a soldered joint can be made to that material. Good solderability requires wetting...5 KB (389 words) - 14:59, 19 October 2022
- stresses are generated in the solder due to coefficient of thermal expansion (CTE) mismatches. This causes the solder joints to experience non-recoverable...19 KB (2,753 words) - 06:38, 22 July 2023
A soldering iron is a hand tool used in soldering. It supplies heat to melt solder so that it can flow into the joint between two workpieces. A soldering...23 KB (2,926 words) - 21:44, 2 February 2024
Flux (metallurgy) (redirect from Solder flux)of the joint by the soldering tool or molten solder just in case. In high-temperature metal joining processes (welding, brazing and soldering), fluxes...48 KB (5,572 words) - 19:56, 18 July 2024
non-contact soldering/desoldering methods: infrared soldering and soldering with hot gas. With infrared soldering, the energy for heating up the solder joint is...34 KB (4,441 words) - 05:53, 22 June 2024
Desoldering (redirect from Solder wick)In electronics, desoldering is the removal of solder and components from a circuit board for troubleshooting, repair, replacement, and salvage. Desoldering...12 KB (1,799 words) - 21:21, 30 April 2024
stress) or flexing and vibration (mechanical stress) can cause the solder joints to fracture. Thermal expansion issues can be overcome by matching the...17 KB (2,044 words) - 10:59, 9 November 2023- Stencil printing (redirect from Solder paste mask)placement and solder reflow. The tackiness of the paste enables the components to stay in place. A good solder joint is one where the solder paste has melted...21 KB (2,720 words) - 18:46, 25 June 2023
- technology (SMT) components to either perform failure analysis or inspect for solder joint integrity. It is an application of dye penetrant inspection. Dye-n-Pry...5 KB (489 words) - 00:40, 18 February 2024
ColdHeat (category Brazing and soldering)fundamental principle of soldering: in order to make a good quality solder joint, all parts should be heated to the melting point of the solder so that it can flow...8 KB (1,124 words) - 21:15, 10 March 2024
A soldering gun is an approximately pistol-shaped, electrically powered tool for soldering metals using tin-based solder to achieve a strong mechanical...4 KB (606 words) - 17:15, 9 June 2024- Tin-silver-copper (category Brazing and soldering)Collins. "The Impact of Reflowing A Pb-free Solder Alloy Using A Tin/Lead Solder Alloy Reflow Profile On Solder Joint Integrity". Lead Free Papers. American...7 KB (855 words) - 15:13, 8 September 2023
stress is induced during electromigration. The typical failure of a solder joint due to electromigration will occur at the cathode side. Due to the current...36 KB (4,570 words) - 20:10, 25 March 2024
taken: solder mask defined (SMD) or non-solder mask defined (NSMD). A NSMD approach typically leads to more reliable joints, since the solder is able...15 KB (1,874 words) - 00:12, 28 March 2024
Piping and plumbing fitting (redirect from Ring Type Joint)heated soldering tools are sometimes used. Once the fitting and pipe have reached sufficient temperature, solder is applied to the heated joint, and the...56 KB (6,854 words) - 10:04, 12 July 2024
- soft soldering, are processes which correspond with soldering done at high and at low temperatures. The first embraces jointing effected with soldering mixtures
- nation that survived only as long as its armies survived, the flag of the solder understandably became the flag of the nation. John Coski, The Confederate
- how to produce good soldered joints, and this module aims to present them to you. The first and most important rule of soldering is to choose your tools