Search results

them used universally, including return path, reverse path, envelope from, envelope sender, MAIL FROM, 5321-FROM, return address, From_, Errors-to, etc...

Variable envelope return path (VERP) is a technique used by some electronic mailing list software to enable automatic detection and removal of undeliverable...

which is connected to the power supply ground terminal and serves as a return path for current from different components on the board. In telecommunication...

in an electrical circuit from which voltages are measured, a common return path for electric current, or a direct physical connection to the Earth. Electrical...

used as the return path for the current, to avoid the need for a second wire (or neutral wire) to act as a return path. Single-wire earth return is principally...

address, and for downstream transmission it typically appears in the "Return-Path" header. To authenticate the email address which is actually visible...

analysis, due to the flux induced in the return path. The crucial relative motion is that of the disk and the return path, not of the disk and the magnet. This...

command/reply sequences: MAIL command, to establish the return address, also called return-path, reverse-path, bounce address, mfrom, or envelope sender. RCPT...

replaced by a single-fiber passive optical network (PON). Downstream and return-path transmission use different wavelengths to share the same fiber (typically...

simply copies the reverse path in the SMTP MAIL FROM command into the Return-Path. The MDA also removes bogus Return-Path header fields inserted by other...

electrical circuit is a network consisting of a closed loop, giving a return path for the current. Thus all circuits are networks, but not all networks...

flow to the actuator and/or motors, then return to a reservoir. The fluid is then filtered and re-pumped. The path taken by hydraulic fluid is called a hydraulic...

delivery agent (MDA). Upon final delivery, the Return-Path field is added to the envelope to record the return path. A relay or filtering server will typically...

In electrical circuits sharing a common signal return path, electrical impedance in the return path creates common impedance coupling between the signals...

shortest paths between all pairs of vertices. Although it does not return details of the paths themselves, it is possible to reconstruct the paths with simple...

1000 MHz on the upper end. The fiber optic node also contains a reverse- or return-path transmitter that sends communication from customers back to the headend...

platform. Later they also introduced a return path multiplexer to overcome noise problems when combining return path signals from multiple areas. The proprietary...

Open Shortest Path First (OSPF) is a routing protocol for Internet Protocol (IP) networks. It uses a link state routing (LSR) algorithm and falls into...

the early stages of the SMTP protocol, and subsequently saved as the Return-Path header. This field holds the address to which mail-systems must send...

providing a return path for current to a neutral. Grounding transformers are typically used to: Provide a relatively low-impedance path to ground, thereby...