Microlithography
Microlithography is a general name for any manufacturing process that can create a minutely patterned thin film of protective materials over a substrate, such as a silicon wafer, in order to protect selected areas of it during subsequent etching, deposition, or implantation operations.[1][2] The term is normally used for processes that can reliably produce features of microscopic size, such as 10 micrometres or less. The term nanolithography may be used to designate processes that can produce nanoscale features, such as less than 100 nanometres.
Microlithography is a microfabrication process that is extensively used in the semiconductor industry and also manufacture microelectromechanical systems.
Processes
Specific microlithography processes include:
- Photolithography using light projected on a photosensitive metarial film (photoresist).
- Electron beam lithography, using a steerable electron beam.
- Nanoimprinting
- Interference lithography
- Magnetolithography
- Scanning probe lithography
- Surface-charge lithography[3]
- Diffraction lithography[4]
These processes differ in speed and cost, as well as in the material they can be applied to and the range of feature sizes they can produce. For instance, while the size of features achievable with photolithography is limited by the wavelength of the light used, the technique it is considerably faster and simpler than electron beam lithography, that can achieve much smaller ones.
Applications
The main application for microlithography is fabrication of integrated circuits ("electronic chips"), such as solid-state memories and microprocessors. They can also be used to create diffraction gratings, microscope calibration grids, and other flat structures with microscopic details.
See also
References
- ^ John N Helbert (2001), Handbook of VLSI Microlithography. Elsevier Science, 1022 pages. ISBN 9780815514442
- ^ Bruce W. Smith and Kazuaki Suzuki (2007): Microlithography: Science and Technology, 2nd Edition. CRC Press, 864 pages. ISBN 978-0824790240
- ^ S. Grilli, V. Vespini, P. Ferraro (2008): "Surface-charge lithography for direct PDMS micro-patterning". Langmuir, volume 24, pages 13262–13265. doi:10.1021/la803046j PMID 18986187
- ^ M. Paturzo, S. Grilli, S. Mailis, G. Coppola, M. Iodice, M. Gioffré, P. Ferraro (2008): "Flexible coherent diffraction lithography by tunable phase arrays in lithium niobate crystals". Optics Communications, volume 281, pages 1950–1953. doi:10.1016/j.optcom.2007.12.056
 | This industry-related article is a stub. You can help Wikipedia by expanding it. |