Search results
Appearance
There is a page named "Heat Distortion Temperature" on Wikipedia
- The heat deflection temperature or heat distortion temperature (HDT, HDTUL, or DTUL) is the temperature at which a polymer or plastic sample deforms under...3 KB (416 words) - 16:42, 5 July 2024
- shrinkage (0.5% vs 1.5%), higher stiffness, impact resistance, heat distortion temperature, and weatherability. In the 1960s, James A. Herbig and Ival O...13 KB (1,392 words) - 16:33, 21 July 2024
- 4’-methylenedianiline and 3-nitrophthalic anhydride, has high heat distortion temperature, tensile strength and modulus. They are generally used in high...18 KB (2,394 words) - 09:37, 14 June 2024
- attributes include high tensile strength, flexural modulus, high heat-distortion temperature, low water absorption, mould shrinkage, high surface hardness...20 KB (2,209 words) - 15:33, 19 July 2024
- chilling, normally to extreme temperatures, to achieve the desired result such as hardening or softening of a material. Heat treatment techniques include...45 KB (5,793 words) - 21:48, 9 August 2024
- with 50% for nylon 66. [citation needed] This results in a high heat distortion temperature of 190 °C for unreinforced nylon 46 and 290 °C for glass fiber...5 KB (625 words) - 20:17, 28 February 2024
- resin used will primarily determine the corrosion resistance, heat distortion temperature, and surface finish. Resins used in this process must have low...7 KB (1,033 words) - 00:25, 8 July 2022
- Quenching (redirect from Quenching temperature)obtain certain material properties. A type of heat treating, quenching prevents undesired low-temperature processes, such as phase transformations, from...13 KB (1,754 words) - 09:20, 6 July 2024
- to black body temperature. The hue-heat hypothesis states that low color temperatures will feel warmer while higher color temperatures will feel cooler...30 KB (3,401 words) - 17:33, 17 July 2024
- Induction heating (redirect from Induction heat)to heat treat only the surface of the workpiece. Relative depth varies with temperature because resistivities and permeability vary with temperature. For...16 KB (2,163 words) - 23:14, 13 August 2024
- original on 29 March 2014. Retrieved 26 March 2014. "Heat Distortion Temperature (softening temperature)". pvc.org. Retrieved 26 March 2014. "Bend PVC Pipe...3 KB (346 words) - 04:02, 24 March 2024
- Nevada, and Montana, though the temperature anomalies were not as extreme as in the regions farther north. The heat wave appeared due to an exceptionally...151 KB (12,913 words) - 04:22, 24 June 2024
- Main use were sterilizable goods because of relatively high heat-distortion temperature and low water absorption. BCMO is self extinguishing (because...17 KB (1,868 words) - 15:45, 18 May 2024
- and its distortions should not be confused with the CMB anisotropy power spectrum, which relates to spatial fluctuations of the CMB temperature in different...22 KB (2,860 words) - 21:13, 23 July 2024
- this limit is heat, although in certain electromechanical devices, particularly speakers, it is to prevent mechanical damage. When heat is the limiting...14 KB (1,748 words) - 05:01, 26 July 2024
- or plane heat source leads to inaccuracy in the vicinity of the fusion zone (where temperature is within about 20% of the melting temperature) and prohibits...11 KB (1,513 words) - 04:14, 24 April 2024
- Motherboard (section Temperature and reliability)for heat sink placement. A 2003 study found that some spurious computer crashes and general reliability issues, ranging from screen image distortions to...25 KB (2,822 words) - 09:06, 18 August 2024
- Tempering (metallurgy) (category Metal heat treatments)tools are often tempered at low temperatures, while springs are tempered at much higher temperatures. Tempering is a heat treatment technique applied to...39 KB (5,565 words) - 21:39, 3 May 2024
- Carbon steel (section Forging temperature of steel)isothermal heat treatment applied after an initial quench, typically in a molten salt bath, at a temperature just above the "martensite start temperature". At...21 KB (2,637 words) - 09:21, 28 May 2024
- to determine a few maxima of distortion that can be thus produced. The expansion of metals under the influence of heat is very slight. A mile of iron
- energy of each of them is equal to that of a gaseous molecule at the same temperature. If we further suppose the electrons to strike over and over again against
- temperature oscillations accompany the pressure oscillations and when there are spatial gradients in the temperature oscillations, oscillating heat flow