Search results

Results 1 – 20 of 1,233
Advanced search

Search in namespaces:

There is a page named "Differential housing" on Wikipedia

View (previous 20 | ) (20 | 50 | 100 | 250 | 500)
  • Thumbnail for Differential (mechanical device)
    A differential is a gear train with three drive shafts that has the property that the rotational speed of one shaft is the average of the speeds of the...
    17 KB (1,988 words) - 23:29, 20 May 2024
  • Thumbnail for Limited-slip differential
    A limited-slip differential (LSD) is a type of differential gear train that allows its two output shafts to rotate at different speeds but limits the maximum...
    32 KB (4,157 words) - 16:58, 8 June 2024
  • Thumbnail for Portal axle
    ground clearance is increased, particularly beneath the low-slung differential housing of the main axles — and secondly, any hub reduction gearing allows...
    10 KB (1,031 words) - 03:03, 21 March 2024
  • Thumbnail for Hotchkiss drive
    in front to the differential in the rear. The differentiating characteristic of the Hotchkiss drive is the fact that the axle housing is firmly attached...
    5 KB (613 words) - 20:05, 14 February 2024
  • Thumbnail for Ride height
    lowest point of the automobile, typically the bottom exterior of the differential housing (even though the lower shock mounting point maybe lower); or, more...
    8 KB (904 words) - 00:43, 15 June 2024
  • Substitution of rear axle with a smooth differential housing: $2.10 Protective shield between differential housing and fuel tank: $2.35 Improvement and reinforcement...
    33 KB (4,909 words) - 20:49, 17 May 2024
  • Thumbnail for Torque tube
    limited-slip differential. The purpose of a torque tube is to hold the rear end in place during acceleration and braking. Otherwise, the axle housing would suffer...
    13 KB (1,466 words) - 13:26, 17 June 2024
  • Thumbnail for Beam axle
    traction and induce wheel hop or sudden adverse toe changes. The bulky differential housing of a Hotchkiss live axle reduces ground clearance, hindering the...
    8 KB (1,057 words) - 01:14, 29 April 2024
  • Thumbnail for Oldsmobile 442
    shifter for use with the Turbo Hydra-matic transmission, and aluminum differential housing and cover (option W27). All Oldsmobile V8s received new Positive...
    51 KB (6,807 words) - 16:01, 11 May 2024
  • Thumbnail for Worm drive
    drive differential for strength. The worm drive is not as efficient as a hypoid gear, and such trucks invariably have a very large differential housing, with...
    15 KB (1,851 words) - 16:18, 6 May 2024
  • have up to two inches removed from the bottom of the 10.5" 14-bolt differential housing to maximize ground clearance. The popularity of GM trucks and vans...
    10 KB (1,293 words) - 21:47, 4 January 2024
  • and two trailing arms with a A- bracket (which connected to the differential housing and brackets near the trailing arm pivots) sorting out axle location...
    23 KB (3,448 words) - 23:10, 29 May 2024
  • Thumbnail for Toyota Fortuner
    suspension with coil springs. The rear differential lock also has its componentry placed within the differential housing for improved off-road protection....
    93 KB (8,111 words) - 22:40, 17 June 2024
  • Thumbnail for Tatra 815
    that the input drive shaft goes essentially straight through the differential housing, allowing simple coupling to a second set of swing axles. This modular...
    19 KB (2,044 words) - 03:00, 30 April 2024
  • a horizontal coil spring by a right angle link. At the rear the differential housing was fixed to the chassis and drive was taken to the wheels through...
    1 KB (105 words) - 10:44, 25 January 2022
  • Thumbnail for Audi S4
    lower control arms are mounted to a subframe which also carries the differential housing. Shock absorbers, coil springs, and anti-roll bars are fitted front...
    55 KB (6,039 words) - 21:34, 30 May 2024
  • Thumbnail for Mid-engine design
    (used only one universal joint between transmission tailshaft housing and differential housing) Dodge A100 and Viper Ferrari 599 GTB Fiorano, 612 Scaglietti...
    16 KB (1,796 words) - 09:43, 25 June 2024
  • Thumbnail for BMW New Class
    wishbones pivoted from a stout cross beam that also supported the differential housing. While BMW was using MacPherson struts for their first time on the...
    28 KB (2,850 words) - 05:26, 25 June 2024
  • Thumbnail for Land Rover series
    Long-wheelbase series-III vehicles had the Salisbury rear axle (the differential housing and axle case are one piece)[clarification needed] as standard, although...
    57 KB (7,493 words) - 03:16, 13 May 2024
  • Thumbnail for Mini
    engine location due to the remote housing extension being directly bolted onto the back of the differential housing) as seen on Mini 1000 cars of the...
    122 KB (13,664 words) - 16:09, 23 June 2024
View (previous 20 | ) (20 | 50 | 100 | 250 | 500)