Triethylamine

Source: Wikipedia, the free encyclopedia.
Not to be confused with Triethanolamine.
Triethylamine
Skeletal formula of triethylamine
Ball and stick model of triethylamine
Ball and stick model of triethylamine
Spacefill model of triethylamine
Spacefill model of triethylamine
Names
Preferred IUPAC name
N,N-Diethylethanamine
Other names
(Triethyl)amine
Triethylamine (no longer IUPAC name[1])
Identifiers
3D model (JSmol)
Abbreviations TEA[2]
605283
ChEBI
ChEMBL
ChemSpider
ECHA InfoCard 100.004.064 Edit this at Wikidata
EC Number
  • 204-469-4
KEGG
MeSH triethylamine
RTECS number
  • YE0175000
UNII
UN number 1296
  • InChI=1S/C6H15N/c1-4-7(5-2)6-3/h4-6H2,1-3H3 checkY
    Key: ZMANZCXQSJIPKH-UHFFFAOYSA-N checkY
  • CCN(CC)CC
Properties[5]
C6H15N
Molar mass 101.193 g·mol−1
Appearance Colourless liquid
Odor Fishy, ammoniacal
Density 0.7255 g mL−1
Melting point −114.70 °C; −174.46 °F; 158.45 K
Boiling point 88.6 to 89.8 °C; 191.4 to 193.5 °F; 361.7 to 362.9 K
112.4 g/L at 20 °C[3]
Solubility miscible with organic solvents
log P 1.647
Vapor pressure 6.899–8.506 kPa
66 μmol Pa−1 kg−1
Acidity (pKa) 10.75 (for the conjugate acid) (H2O), 9.00 (DMSO)[4]
-81.4·10−6 cm3/mol
1.401
Thermochemistry
216.43 J K−1 mol−1
−169 kJ mol−1
−4.37763 to −4.37655 MJ mol−1
Hazards
GHS labelling:
GHS02: Flammable GHS05: Corrosive GHS07: Exclamation mark
Danger
H225, H302, H312, H314, H332
P210, P280, P305+P351+P338, P310
NFPA 704 (fire diamond)
NFPA 704 four-colored diamondHealth 3: Short exposure could cause serious temporary or residual injury. E.g. chlorine gasFlammability 3: Liquids and solids that can be ignited under almost all ambient temperature conditions. Flash point between 23 and 38 °C (73 and 100 °F). E.g. gasolineInstability 0: Normally stable, even under fire exposure conditions, and is not reactive with water. E.g. liquid nitrogenSpecial hazards (white): no code
3
3
0
Flash point −15 °C (5 °F; 258 K)
312 °C (594 °F; 585 K)
Explosive limits 1.2–8%
2 ppm (8 mg/m3) (TWA), 
4 ppm (17 mg/m3) (STEL)
Lethal dose or concentration (LD, LC):
  • 580 mg kg−1 (dermal, rabbit)
  • 730 mg kg−1 (oral, rat)
1425 ppm (mouse, 2 hr)[7]
NIOSH (US health exposure limits):
PEL (Permissible)
 TWA 25 ppm (100 mg/m3)[6]
REL (Recommended)
 None established[6]
IDLH (Immediate danger)
 200 ppm[6]
Related compounds
Related amines
Related compounds
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
checkY verify (what is checkY☒N ?)

Triethylamine is the chemical compound with the formula N(CH2CH3)3, commonly abbreviated Et3N. It is also abbreviated TEA, yet this abbreviation must be used carefully to avoid confusion with triethanolamine or tetraethylammonium, for which TEA is also a common abbreviation.[8][9] It is a colourless volatile liquid with a strong fishy odor reminiscent of ammonia. Like diisopropylethylamine (Hünig's base), triethylamine is commonly employed in organic synthesis, usually as a base.

Synthesis and properties

Triethylamine is prepared by the alkylation of ammonia with ethanol:[10]

NH3 + 3 C2H5OH → N(C2H5)3 + 3 H2O

The pKa of protonated triethylamine is 10.75,[4] and it can be used to prepare buffer solutions at that pH. The hydrochloride salt, triethylamine hydrochloride (triethylammonium chloride), is a colorless, odorless, and hygroscopic powder, which decomposes when heated to 261 °C.

Triethylamine is soluble in water to the extent of 112.4 g/L at 20 °C.[3] It is also miscible in common organic solvents, such as acetone, ethanol, and diethyl ether.

Laboratory samples of triethylamine can be purified by distilling from calcium hydride.[11]

In alkane solvents triethylamine is a Lewis base that forms adducts with a variety of Lewis acids, such as I2 and phenols. Owing to its steric bulk, it forms complexes with transition metals reluctantly.[12][13][14]

Applications

Triethylamine is commonly employed in organic synthesis as a base. For example, it is commonly used as a base during the preparation of esters and amides from acyl chlorides.[15] Such reactions lead to the production of hydrogen chloride which combines with triethylamine to form the salt triethylamine hydrochloride, commonly called triethylammonium chloride. (R, R' = alkyl, aryl):

R2NH + R'C(O)Cl + Et3N → R'C(O)NR2 + Et3NH+Cl−

Like other tertiary amines, it catalyzes the formation of urethane foams and epoxy resins. It is also useful in dehydrohalogenation reactions and Swern oxidations.

Triethylamine is readily alkylated to give the corresponding quaternary ammonium salt:

RI + Et3N → Et3NR+I−

Triethylamine is mainly used in the production of quaternary ammonium compounds for textile auxiliaries and quaternary ammonium salts of dyes. It is also a catalyst and acid neutralizer for condensation reactions and is useful as an intermediate for manufacturing medicines, pesticides and other chemicals.

Triethylamine salts, like any other tertiary ammonium salts, are used as an ion-interaction reagent in ion interaction chromatography, due to their amphiphilic properties. Unlike quaternary ammonium salts, tertiary ammonium salts are much more volatile, therefore mass spectrometry can be used while performing analysis.

Niche uses

Triethylamine is commonly used in the production of anionic PUDs. A polyurethane prepolymer is prepared using an isocyanate and polyol with dimethylol propionic acid (DMPA). This molecule contains two hydroxy groups and a carboxylic acid group. This prepolymer is then dispersed in water with triethylamine or other neutralizing agent. The TEA reacts with the carboxylic acid forming a salt which is water soluble. Usually, a diamine chain extender is then added to produce a polyurethane dispersed in water with no free NCO groups but with polyurethane and polyurea segments.[16][17][18] Dytek A is commonly used as a chain extender.[19]

Triethylamine is used to give salts of various carboxylic acid-containing pesticides, e.g. Triclopyr and 2,4-dichlorophenoxyacetic acid.[citation needed]

Triethylamine is the active ingredient in FlyNap, a product for anesthetizing Drosophila melanogaster.[citation needed] Triethylamine is used in mosquito and vector control labs to anesthetize mosquitoes. This is done to preserve any viral material that might be present during species identification.

The bicarbonate salt of triethylamine (often abbreviated TEAB, triethylammonium bicarbonate) is useful in reverse phase chromatography, often in a gradient to purify nucleotides and other biomolecules.[citation needed]

Triethylamine was found during the early 1940s to be hypergolic in combination with nitric acid, and was considered a possible propellant for early hypergolic rocket engines.[20] The Soviet "Scud" Missile used TG-02 ("Tonka-250"), a mixture of 50% xylidine and 50% triethylamine as a starting fluid to ignite its rocket engine.[21]

Natural occurrence

Hawthorn flowers have a heavy, complicated scent, the distinctive part of which is triethylamine, which is also one of the first chemicals produced by a dead human body when it begins to decay. Due to the scent, it is considered unlucky in British culture to bring hawthorn into a house. Gangrene and semen are also said to possess a similar odour.[22]

References

  1. ^ "Front Matter". Nomenclature of Organic Chemistry : IUPAC Recommendations and Preferred Names 2013 (Blue Book). Cambridge: The Royal Society of Chemistry. 2014. p. 671. doi:10.1039/9781849733069-FP001. ISBN 978-0-85404-182-4.
  2. ^ X. Bories-Azeau, S. P. Armes, and H. J. W. van den Haak, Macromolecules 2004, 37, 2348 PDF
  3. ^ a b "MSDS - 471283". www.sigmaaldrich.com. Retrieved 2020-06-17.
  4. ^ a b David Evans Research Group Archived 2012-01-21 at the Wayback Machine
  5. ^ The Merck Index (11th ed.). 9582.
  6. ^ a b c NIOSH Pocket Guide to Chemical Hazards. "#0633". National Institute for Occupational Safety and Health (NIOSH).
  7. ^ "Triethylamine". Immediately Dangerous to Life or Health Concentrations (IDLH). National Institute for Occupational Safety and Health (NIOSH).
  8. ^ "Ethanolamine Compounds (MEA, DEA, TEA And Others)". Safe Cosmetics. Retrieved 2020-06-17.
  9. ^ "tetraethylammonium | Ligand page | IUPHAR/BPS Guide to PHARMACOLOGY". www.guidetopharmacology.org. Retrieved 2020-06-17.
  10. ^ Eller, Karsten; Henkes, Erhard; Rossbacher, Roland; Höke, Hartmut (2000). Amines, Aliphatic. doi:10.1002/14356007.a02_001. ISBN 3-527-30673-0.
  11. ^ F., Armarego, W. L. (2012-10-17). Purification of Laboratory Chemicals. Chai, Christina Li Lin (Seventh ed.). Amsterdam. ISBN 978-0-12-382162-1. OCLC 820853648.{{cite book}}: CS1 maint: location missing publisher (link) CS1 maint: multiple names: authors list (link)
  12. ^ DeLaive, Patricia J.; Sullivan, B. P.; Meyer, T. J.; Whitten, D. G. (July 1979). "Applications of light-induced electron-transfer reactions. Coupling of hydrogen generation with photoreduction of ruthenium(II) complexes by triethylamine". Journal of the American Chemical Society. 101 (14): 4007–4008. doi:10.1021/ja00508a070. ISSN 0002-7863.
  13. ^ DeLaive, Patricia J.; Foreman, Thomas K.; Giannotti, Charles; Whitten, David G. (August 1980). "Photoinduced electron transfer reactions of transition-metal complexes with amines. Mechanistic studies of alternate pathways to back electron transfer". Journal of the American Chemical Society. 102 (17): 5627–5631. doi:10.1021/ja00537a037. ISSN 0002-7863.
  14. ^ Seligson, Allen L.; Trogler, William C. (March 1991). "Cone angles for amine ligands. X-ray crystal structures and equilibrium measurements for ammonia, ethylamine, diethylamine, and triethylamine complexes with the [bis(dimethylphosphino)ethane]methylpalladium(II) cation". Journal of the American Chemical Society. 113 (7): 2520–2527. doi:10.1021/ja00007a028. ISSN 0002-7863.
  15. ^ Sorgi, K. L. (2001). "Triethylamine". Encyclopedia of Reagents for Organic Synthesis. New York: John Wiley & Sons. doi:10.1002/047084289X.rt217. ISBN 978-0-471-93623-7.
  16. ^ Pubchem. "Dimethylolpropionic acid". pubchem.ncbi.nlm.nih.gov. Retrieved 2018-08-21.
  17. ^ Jang, JY; Jhon, YK; Cheong, IW; Kim, JH (2002-01-01). "Colloids and Surfaces A: Physicochem". Eng. Aspects. 196: 135–143.
  18. ^ Howarth, GA (2003-06-01). "Polyurethanes, polyurethane dispersions and polyureas: Past, present and future". Surface Coatings International Part B: Coatings Transactions. 86 (2): 111–118. doi:10.1007/BF02699621. ISSN 1476-4865. S2CID 93574741.
  19. ^ Madbouly, Samy A.; Otaigbe, Joshua U.; Nanda, Ajaya K.; Wicks, Douglas A. (2005-05-01). "Rheological Behavior of Aqueous Polyurethane Dispersions: Effects of Solid Content, Degree of Neutralization, Chain Extension, and Temperature". Macromolecules. 38 (9): 4014–4023. Bibcode:2005MaMol..38.4014M. doi:10.1021/ma050453u. ISSN 0024-9297.
  20. ^ Clark, John (1972). Ignition!: An Informal History of Liquid Rocket Propellants (PDF). Rutgers University, the State University of New Jersey. p. 13. ISBN 0-8135-0725-1.
  21. ^ Brügge, Norbert (24 February 2020). "The Soviet "Scud" missile family". b14643.de. Retrieved 29 July 2022.
  22. ^ The book of general ignorance. John Lloyd & John Mitchinson. Faber & Faber 2006, The Hawthorn, BBC

External links

Retrieved from "https://en.wikipedia.org/w/index.php?title=Triethylamine&oldid=1211195917"