Lithium–silicon battery

Source: Wikipedia, the free encyclopedia.

Lithium–silicon batteries are lithium-ion battery that employ a silicon-based anode and lithium ions as the charge carriers.[1] Silicon based materials generally have a much larger specific capacity, for example 3600 mAh/g for pristine silicon,[2] relative to the standard anode material graphite, which is limited to a maximum theoretical capacity of 372 mAh/g for the fully lithiated state LiC6.[3]

Silicon's large volume change (approximately 400% based on crystallographic densities) when lithium is inserted, along with high reactivity in the charged state, are obstacles to commercializing this type of anode.[4] Commercial battery anodes may have small amounts of silicon, boosting their performance slightly. The amounts are closely held trade secrets, limited as of 2018 to at most 10% of the anode.[citation needed] Lithium-silicon batteries also include cell configurations where silicon is in compounds that may at low voltage store lithium by a displacement reaction, including silicon oxycarbide, silicon monoxide or silicon nitride.[5]

History

The first laboratory experiments with lithium-silicon materials took place in the early to mid 1970s.[6]

Silicon-graphite composite electrodes

Silicon carbon composite anodes were first reported in 2002 by Yoshio.[7] Studies of these composite materials have shown that the capacities are a weighted average of the two end members (graphite and silicon). On cycling, electronic isolation of the silicon particles tends to occur with the capacity falling off to the capacity of the graphite component. This effect has been tempered using alternative synthetic methodologies or morphologies that can be created to help maintain contact with the current collector. This has been identified in studies involving grown silicon nanowires that are chemical bonded to the metal current collector by alloy formation. Sample production of batteries using a silicon nanowire-graphite composite electrode were produced by Amprius in 2014.[8] The same company claims to have sold several hundred thousand of these batteries as of 2014.[9] In 2016, Stanford University researchers presented a method of encapsulating silicon microparticles in a graphene shell, which confines fractured particles and also acts as a stable solid electrolyte interphase layer. These microparticles reached an energy density of 3,300 mAh/g.[10]

In 2015, Tesla CEO Elon Musk claimed that silicon in Model S batteries increased the car's range by 6%.[11]

As of 2018, products by startups Sila Nanotechnologies, Global Graphene Group, Enovix, Enevate, Group14 Technologies and others were undergoing tests by the battery manufacturers, car companies, and consumer-electronics companies. Sila clients include BMW and Amperex Technology, battery supplier to companies including Apple and Samsung. BMW announced plans to incorporate Sila technology by 2023 and increase battery-pack capacity by 10-15%.[12][13][14] As of 2021, Enovix was the first company to ship finished silicon anode batteries to end customers.[15]

Group14 Technologies has patented a silicon-carbon composite SCC55, which enables 50% more in fully lithiated volumetric energy density than graphite used in conventional lithium-ion battery anodes. SCC55 has been tested and validated by battery manufacturers Farasis and StoreDot, the latter of which found that SCC55 could be charged to 80% capacity in 10 minutes.[16] Group14's investors and customers include Porsche AG, Amperex Technology Limited, Showa Denko and SK materials.[14][17][16] However, the original venture capital investor, OVP Venture Partners of Bellevue, WA remains the company's largest shareholder.

In May 2022, Porsche AG led Group14's $400M Series C round and announced plans to produce lithium-silicon battery cells with Group14's technology in Germany in 2024 to help power their new electric vehicles.[18]  Group14 plans to use Porsche's funding to accelerate the development of their second U.S. factory to supply a minimum of 600,000 EVs annually.[19] In January 2024, Group14 announced that through its partnership with Amperex Technology Limitied, they had over 1 million smart phones in China (Honor) using its technology.[20]

On September 22, 2020, Tesla revealed its plans for gradually increasing the amounts of silicon in its future batteries, focusing on the anodes. Tesla's approach is to encapsulate the silicon particles with an elastic, ion-permeable coating. In this way, the silicon-swelling concern is accommodated, thereby enabling the desired increase in battery capacity to be achieved. Overall battery life expectancy is expected to remain unimpacted by this change. The reason for the gradual (instead of sudden) increases in silicon usage is to enable testing and confirmation of the stepwise changes.[21][22]

In September, 2021 Sila announced that it had begun shipping its first product, and that it had been incorporated in Whoop 4.0.[23]

Specific capacity

A crystalline silicon anode has a theoretical specific capacity of 3600 mAh/g, approximately ten times that of commonly used graphite anodes (limited to 372 mAh/g).[3] Each silicon atom can bind up to 3.75 lithium atoms in its fully lithiated state (Li
3.75
Si
), compared to one lithium atom per 6 carbon atoms for the fully lithiated graphite (LiC
6
).[24][25]

Specific capacity and volume change for some anode materials (given in their lithiated state).[4][26][27]
Anode material Specific capacity (mAh/g) Volume change
Li 3862[verification needed] -
LiC
6
372[3] 10%
Li
13
Sn
5
990 252%
Li
9
Al
4
2235 604%
Li
15
Si
4
3600 320%

Silicon swelling

The lattice distance between silicon atoms multiplies as it accommodates lithium ions (lithiation), reaching 320% of the original volume.[4] The expansion causes large anisotropic stresses to occur within the electrode material, fracturing and crumbling the silicon material and detachment from the current collector.[28] Prototypical lithium-silicon batteries lose most of their capacity in as few as 10 charge-discharge cycles.[6][29] A solution to the capacity and stability issues posed by the significant volume expansion upon lithiation is critical to the success of silicon anodes.

Because the volume expansion and contraction properties of nanoparticles differ greatly from the bulk, silicon nanostructures have been investigated as a potential solution. While they have a higher percentage of surface atoms than bulk silicon particles, the increased reactivity may be controlled by encasement, coatings, or other methods that limit surface—electrolyte contact. One method identified by researchers has used silicon nanowires on a conductive substrate for an anode, and found that the nanowire morphology creates direct current pathways to help increase power density and decreases disruption from volume change.[30] However, the large volume change of the nanowires can still pose a fading problem.

Other studies examined the potential of silicon nanoparticles. Anodes that use silicon nanoparticles may overcome the price and scale barriers of nanowire batteries, while offering more mechanical stability over cycling compared to other silicon electrodes.[31] Typically, these anodes add carbon as a conductive additive and a binder for increased mechanical stability. However, this geometry does not fully solve the issue of large volume expansion upon lithiation, exposing the battery to increased risk of capacity loss from inaccessible nanoparticles after cycle-induced cracking and stress.

Another nanoparticle approach is to use a conducting polymers matrix as both the binder and the polymer electrolyte for nanoparticle batteries. One study examined a three-dimensional conducting polymer and hydrogel network to encase and allow for ionic transport to the electrochemically active silicon nanoparticles.[32] The framework resulted in a marked improvement in electrode stability, with over 90% capacity retention after 5,000 cycles. Other methods to accomplish similar outcomes include utilizing slurry coating techniques, which are inline with presently used electrode creation methodologies.[33]

A recent study by Zhang, et al., uses two-dimensional, covalently bound silicon-carbon hybrids to reduce volume change and stabilize capacity.[34]

Charged silicon reactivity

Besides the well recognized problems associated with large volume expansion, for example cracking the SEI layer, a second well recognized issue involves the reactivity of the charged materials. Since charged silicon is a lithium silicide, its salt-like structure is built from a combination of silicon (-4) Zintl anions and lithium cations. These silicide anions are highly reduced and display high reactivity with the electrolyte components that is charge compensated locally by reduction of the solvents.[35][36] Recent work by Han, et al., has identified an in-situ coating synthesis method that eliminates the redox activity of the surface and limits the reactions that can take place with the solvents. Although it does not effect the issues associated with volume expansion, it has been seen with Mg cation based coatings to increase the cycle life and capacity significantly[37] in a manner similar to the film forming additive fluoroethylene carbonate (FEC).[38]

Solid electrolyte interphase layer

SEI layer formation on silicon. In green on the left, the normal battery operation, in blue the SEI layer formation. The electrolyte decomposes by reduction.

Starting from the first cycle of lithium-ion battery operation, the electrolyte decomposes to form lithium compounds on the anode surface, producing a layer called the solid-electrolyte interface (SEI). For both silicon and graphite anodes, this SEI layer is the result of the reduction potential of the anode. During cycling, electrons flow in and out of the anode through its current collector. Due to the strong voltages present during anode operation, these electrons will decompose the electrolyte molecules at the anode surface.[39][40] The properties and evolution of the SEI fundamentally affect the overall battery performance through various mechanisms. Since the SEI layer contains numerous lithium compounds, the production of the SEI reduces the total charge capacity of the battery by consuming some of the lithium that would otherwise be used to store charge. This degradation mechanism is known as Loss of Lithium Inventory (LLI).[41] Furthermore, the SEI's lithium permeability affects the amount of lithium that the anode can store, while the SEI's electronic resistivity determines how fast the SEI grows (the more electronically conductive, the more the electrolyte will be reduced and the faster the SEI will grow).[39] When using lithium hexafluorophosphate (LiPF6) salts dissolved in a carbonate solvent, one of the most frequently used electrolyte compositions, SEI formation can also be caused by chemical reactions between the electrolyte and trace amounts of water, producing hydrofluoric acid (HF) that further reduces performance.[42] In a lithium-silicon battery, the SEI plays an especially important role in capacity degradation, due to the large volumetric changes during cycling. Expansion and contraction of the anode material cracks the SEI layer that has formed on top of it, exposing more of the anode material to direct contact with the electrolyte, which results in further SEI production and LLI-based degradation.[43]

Understanding the structure and composition of the SEI layer throughout cycling is critical for improving SEI stability and therefore improving battery performance. However, the composition of the SEI is not fully understood, both for graphitic and silicon-based anodes. Computational methods have been used to explore the vast numbers of SEI compounds and reactions to better understand how SEI development progresses .[44] For graphitic anodes in an LiPF6 and ethylene carbonate (EC) electrolyte, Heiskanen et al. identified three distinct phases of SEI formation. First, the reduction of LiPF6 and EC respectively result in an SEI that is mostly lithium fluoride (LiF) and lithium ethylene dicarbonate (LEDC). Subsequently, the LEDC decomposes into a variety of components, which can be solid, gaseous, soluble in the electrolyte, or insoluble. The formation of gases and electrolytically soluble molecules results in the SEI layer becoming more porous, since these species diffuse away from the anode surface. This SEI porosity exposes the electrolyte to the anode surface, which results in the formation of more LEDC and LiF on the exterior of the SEI layer. Overall, these mechanisms result in the formation of an inner SEI layer that mostly contains the electrolytically insoluble compounds, and an exterior SEI consisting of the LEDC and LiF that form from electrolyte reduction.[39] In a silicon-anode battery, a similar two-layer SEI structure also results, with inorganic compounds (lithium fluoride, lithium oxide, lithium carbonate, etc.) forming an inner layer and organic compounds forming an outer layer.[43]

Since the SEI is formed from the electrolyte, adjusting the electrolyte composition can have large effects on the capacity retention of lithium-silicon batteries. As a result, a wide variety of electrolyte additives have been tested and found to provide capacity improvements, such as silane molecules, succinic anhydride, citric acid, ethers, and additional carbonates (such as fluoroethylene carbonate and vinylene carbonate).[45] These additives have the potential to improve performance through multiple mechanisms. For example, vinylene carbonate and fluoroethylene carbonate have both been reported to improve the SEI layer's ability to block the electrolyte from interacting with the anode surface, potentially by increasing the SEI density. Another potential mechanism is highlighted by silane, which can form Si-O networks on the surface of the anode that stabilizes the organic SEI layer deposited on top of it.[46]

See also

References

  1. ^ Nazri, Gholam-Abbas; Pistoia, Gianfranco, eds. (2004). Lithium Batteries - Science and Technology. Kluwer Academic Publishers. p. 259. ISBN 978-1-4020-7628-2.
  2. ^ Zuo, Xiuxia; Zhu, Jin; Muller-Buschbaum, Peter; Cheng, Ya Chin (2017). "Silicon based lithium-ion battery anodes: A chronicle perspective review". Nano Energy. 31 (1): 113–143. doi:10.1016/j.nanoen.2016.11.013.
  3. ^ a b c Shao, Gaofeng; Hanaor, Dorian A. H.; Wang, Jun; Kober, Delf; Li, Shuang; Wang, Xifan; Shen, Xiaodong; Bekheet, Maged F.; Gurlo, Aleksander (2020). "Polymer-Derived SiOC Integrated with a Graphene Aerogel as a Highly Stable Li-Ion Battery Anode". ACS Applied Materials & Interfaces. 12 (41): 46045–46056. arXiv:2104.06759. doi:10.1021/acsami.0c12376. PMID 32970402. S2CID 221915420.
  4. ^ a b c Mukhopadhyay, Amartya; Sheldon, Brian W. (2014). "Deformation and stress in electrode materials for Li-ion batteries". Progress in Materials Science. 63: 58–116. doi:10.1016/j.pmatsci.2014.02.001.
  5. ^ Suzuki, Naoki; Cervera, Rinlee Butch; Ohnishi, Tsuyoshi; Takada, Kazunori (2013). "Silicon nitride thin film electrode for lithium-ion batteries". Journal of Power Sources. 231: 186–189. doi:10.1016/j.jpowsour.2012.12.097.
  6. ^ a b Lai, S (1976). "Solid Lithium Silicon Electrodes". Journal of the Electrochemical Society. 123 (8): 1196–1197. Bibcode:1976JElS..123.1196L. doi:10.1149/1.2133033.
  7. ^ Yoshio, Masaki; Wang, Hongyu; Fukudu, Kenji; Umeno, Tatsuo; Dimov, Nickolay; Ogumi, Zempachi (2002). "Carbon-Coated Silicon as a Lithium-Ion Battery Anode Materials". Journal of the Electrochemical Society. 149 (12): A1598. Bibcode:2002JElS..149A1598Y. doi:10.1149/1.1518988. ISSN 0013-4651.
  8. ^ St. John, Jeff (2014-01-06). "Amprius Gets $30M Boost for Silicon-Based Lithium-Ion Batteries". Greentechmedia. Retrieved 2015-07-21.
  9. ^ Bullis, Kevin (10 January 2014). "Startup Gets $30 Million to Bring High-Energy Silicon Batteries to Market". MIT Technology Review.
  10. ^ Li, Yuzhang; Yan, Kai; Lee, Hyun-Wook; Lu, Zhenda; Liu, Nian; Cui, Yi (2016). "Growth of conformal graphene cages on micrometre-sized silicon particles as stable battery anodes". Nature Energy. 1 (2): 15029. Bibcode:2016NatEn...115029L. doi:10.1038/nenergy.2015.29. ISSN 2058-7546. S2CID 256713197.
  11. ^ Rathi, Akshat (2021-03-10). "How we get to the next big battery breakthrough". Quartz. Retrieved 2019-08-18.
  12. ^ Wesoff, Eric (2019-04-17). "Daimler Leads $170M Investment in Sila Nano's Next-Generation Battery Tech". Green Tech Media. Retrieved 2019-08-18.
  13. ^ Root, Al (2020-10-19). "Another Way Tesla Can Reduce Battery Costs".
  14. ^ a b Casey, Tina (2020-12-21). "US Energy Dept. Hearts New Silicon EV Batteries".
  15. ^ "How The Next Batteries Will Change the World". Bloomberg. 2021-03-10. Retrieved 2021-03-10.
  16. ^ a b Lienert, Paul (2022-05-04). "Porsche leads $400 million investment in EV battery startup Group14". Reuters. Retrieved 2022-06-16.
  17. ^ "SCC55 - Group14 Technologies, Inc. Trademark Registration". USPTO.report.
  18. ^ Gardner, Greg. "Group14 Technologies Raises $400 From Porsche-Led Investor Group". Forbes. Retrieved 2022-06-16.
  19. ^ "Electric vehicles: The 'entire industry' is transitioning to silicon batteries, Group14 CEO says". finance.yahoo.com. Retrieved 2022-06-16.
  20. ^ Bloomberg. "ATL bets on silicon anodes for smartphone batteries". www.bloomberg.com/.
  21. ^ Tesla Inc. "2020 Annual Meeting of Stockholders".
  22. ^ Fox, Eva. "Tesla Silicon Anode for 4680 Battery Cell: What's the Secret?".
  23. ^ Bellan, Rebecca (September 8, 2021). "Sila Nanotechnologies' battery technology will launch in Whoop wearables". TechCrunch. Retrieved 2021-09-09.
  24. ^ Tarascon, J.M.; Armand, M. (2001). "Issues and challenges facing rechargeable lithium batteries". Nature. 414 (6861): 359–67. Bibcode:2001Natur.414..359T. doi:10.1038/35104644. PMID 11713543. S2CID 2468398.
  25. ^ Galvez-Aranda, Diego E.; Ponce, C. (2017). "Molecular dynamics simulations of the first charge of a Li-ion—Si-anode nanobattery". J Mol Model. 23 (120): 120. doi:10.1007/s00894-017-3283-2. OSTI 1430651. PMID 28303437. S2CID 3919695.
  26. ^ Besenhard, J.; Daniel, C., eds. (2011). Handbook of Battery Materials. Wiley-VCH.
  27. ^ Nazri, Gholam-Abbas; Pistoia, Gianfranco, eds. (2004). Lithium Batteries - Science and Technology. Kluwer Academic Publishers. p. 117. ISBN 978-1-4020-7628-2.
  28. ^ Berla, Lucas A.; Lee, Seok Woo; Ryu, Ill; Cui, Yi; Nix, William D. (2014). "Robustness of amorphous silicon during the initial lithiation/delithiation cycle". Journal of Power Sources. 258: 253–259. Bibcode:2014JPS...258..253B. doi:10.1016/j.jpowsour.2014.02.032.
  29. ^ Jung, H (2003). "Amorphous silicon anode for lithium-ion rechargeable batteries". Journal of Power Sources. 115 (2): 346–351. Bibcode:2003JPS...115..346J. doi:10.1016/S0378-7753(02)00707-3.
  30. ^ Chan, Candace K.; Peng, Hailin; Liu, Gao; McIlwrath, Kevin; Zhang, Xiao Feng; Huggins, Robert A.; Cui, Yi (Jan 2008). "High-performance lithium battery anodes using silicon nanowires". Nature Nanotechnology. 3 (1): 31–35. Bibcode:2008NatNa...3...31C. doi:10.1038/nnano.2007.411. PMID 18654447.
  31. ^ Ge, Mingyuan; Rong, Jiepeng; Fang, Xin; Zhang, Anyi; Lu, Yunhao; Zhou, Chongwu (2013-02-06). "Scalable preparation of porous silicon nanoparticles and their application for lithium-ion battery anodes". Nano Research. 6 (3): 174–181. doi:10.1007/s12274-013-0293-y. ISSN 1998-0124. S2CID 31924978.
  32. ^ Wu, Hui; Yu, Guihua; Pan, Lijia; Liu, Nian; McDowell, Matthew T.; Bao, Zhenan; Cui, Yi (2013-06-04). "Stable Li-ion battery anodes by in-situ polymerization of conducting hydrogel to conformally coat silicon nanoparticles". Nature Communications. 4: 1943. Bibcode:2013NatCo...4.1943W. doi:10.1038/ncomms2941. ISSN 2041-1723. PMID 23733138.
  33. ^ Higgins, Thomas M.; Park, Sang-Hoon; King, Paul J.; Zhang, Chuanfang (John); McEvoy, Niall; Berner, Nina C.; Daly, Dermot; Shmeliov, Aleksey; Khan, Umar (2016-03-22). "A Commercial Conducting Polymer as Both Binder and Conductive Additive for Silicon Nanoparticle-Based Lithium-Ion Battery Negative Electrodes". ACS Nano. 10 (3): 3702–3713. doi:10.1021/acsnano.6b00218. hdl:2262/77389. ISSN 1936-0851. PMID 26937766.
  34. ^ Zhang, Xinghao; Wang, Denghui; Qiu, Xiongying; Ma, Yingjie; Kong, Debin; Müllen, Klaus; Li, Xianglong; Zhi, Linjie (2020-07-31). "Stable high-capacity and high-rate silicon-based lithium battery anodes upon two-dimensional covalent encapsulation". Nature Communications. 11 (1): 3826. Bibcode:2020NatCo..11.3826Z. doi:10.1038/s41467-020-17686-4. ISSN 2041-1723. PMC 7395733. PMID 32737306.
  35. ^ Han, Binghong; Piernas Munoz, Maria; Dogan, Fulya; Kubal, Joseph; Trask, Stephen T.; Vaughey, John; Key, Baris (2019-07-05). "Probing the Reaction between PVDF and LiPAA vs Li7Si3: Investigation of Binder Stability for Si Anodes". Journal of the Electrochemical Society. 166 (12): A2396. Bibcode:2019JElS..166A2396H. doi:10.1149/2.0241912jes. S2CID 198348874.
  36. ^ Key, Baris; Bhattacharyya, Rangeet; Morcrette, M; Seznec, V; Tarascon, Jean Marie; Grey, Claire (2009-03-19). "Real-Time NMR Investigations of Structural Changes in Silicon Electrodes for Lithium-Ion Batteries". Journal of the American Chemical Society. 131 (26): 9239–49. doi:10.1021/ja8086278. PMID 19298062.
  37. ^ Han, Binghong; Liao, Chen; Dogan, Fulya; Trask, Stephen; Lapidus, Saul; Vaughey, John; Key, Baris (2019-08-05). "Using Mixed Salt Electrolytes to Stabilize Silicon Anodes for Lithium-Ion Batteries via in Situ Formation of Li–M–Si Ternaries (M = Mg, Zn, Al, Ca)". ACS Applied Materials and Interfaces. 11 (33): 29780–29790. doi:10.1021/acsami.9b07270. PMID 31318201.
  38. ^ Schroder, K; Alvarado, Judith; Yersak, T.A.; Li, J; Dudney, Nancy; Webb, L.J.; Meng, Y.S.; Stevenson, K.J. (2013-08-16). "The Effect of Fluoroethylene Carbonate as an Additive on the Solid Electrolyte Interphase (SEI)on Silicon Lithium-Ion Electrodes". Chemistry of Materials. 27: 5531–5542. doi:10.1021/acs.chemmater.5b01627. OSTI 1261351.
  39. ^ a b c Heiskanen, Satu Kristiina; Kim, Jongjung; Lucht, Brett L. (16 October 2019). "Generation and Evolution of the Solid Electrolyte Interphase of Lithium Ion Batteries". Joule. 3 (10): 2322–2333. doi:10.1016/j.joule.2019.08.018. S2CID 204302703.
  40. ^ Yoon, Taeho; Milien, Mickdy S.; Parimalam, Bharathy S.; Lucht, Brett L (4 April 2017). "Thermal Decomposition of the Solid Electrolyte Interphase (SEI) on Silicon Electrodes for Lithium Ion Batteries". Chemistry of Materials. 29 (7): 3237–3245. doi:10.1021/acs.chemmater.7b00454. OSTI 1534459. Retrieved 17 November 2021.
  41. ^ Birkl, Christoph R.; Roberts, Matthew R.; McTurk, Euan; Bruce, Peter G.; Howey, David A. (15 February 2017). "Degradation diagnostics for lithium ion cells". Journal of Power Sources. 341: 373–386. Bibcode:2017JPS...341..373B. doi:10.1016/j.jpowsour.2016.12.011.
  42. ^ Tasaki, Ken; Kanda, Katsuya; Nakamura, Shinichiro; Ue, Makoto (17 October 2003). "Decomposition of LiPF6and Stability of PF 5 in Li-Ion Battery Electrolytes: Density Functional Theory and Molecular Dynamics Studies". Journal of the Electrochemical Society. 150 (12): 1628. Bibcode:2003JElS..150A1628T. doi:10.1149/1.1622406. Retrieved 17 November 2021.
  43. ^ a b Benitez, Laura; Seminario, Jorge M. (18 August 2016). "Electron Transport and Electrolyte Reduction in the Solid-Electrolyte Interphase of Rechargeable Lithium Ion Batteries with Silicon Anodes". The Journal of Physical Chemistry. 120 (32): 17978–17988. doi:10.1021/acs.jpcc.6b06446. Retrieved 17 November 2021.
  44. ^ Barter, Daniel; Spotte-Smith, Evan (7 November 2022). "Predictive Stochastic Analysis of Massive Filter-Based Electrochemical Reaction Networks". ChemRxiv. doi:10.26434/chemrxiv-2021-c2gp3-v4. Retrieved 16 November 2022.
  45. ^ Zhang, Chengzhi; Wang, Fei; Han, Jian; Bai, Shuo; Tan, Jun; Liu, Jinshui; Li, Feng (2021). "Challenges and Recent Progress on Silicon-Based Anode Materials for Next-Generation Lithium-Ion Batteries". Small Structures. 2 (6). doi:10.1002/sstr.202100009. S2CID 233638303.
  46. ^ Zhang, Yaguang; Du, Ning; Yang, Deren (2019). "Designing superior solid electrolyte interfaces on silicon anodes for high-performance lithium-ion batteries". Nanoscale. 11 (41): 19086–19104. doi:10.1039/C9NR05748J. PMID 31538999. S2CID 202701900.