Automotive industry in Malaysia

Source: Wikipedia, the free encyclopedia.

The automotive industry in Malaysia consists of 27 vehicle producers and over 640 component manufacturers.[1] The Malaysian automotive industry is the third largest in Southeast Asia, and the 23rd largest in the world, with an annual production output of over 500,000 vehicles. The automotive industry contributes 4% or RM 40 billion to Malaysia's GDP, and employs a workforce of over 700,000 throughout a nationwide ecosystem.[1]

The automotive industry in Malaysia traces its origins back to the British colonial era. Ford Malaya became the first automobile assembly plant in Southeast Asia upon its establishment in Singapore in 1926. The automotive industry in post-independence Malaysia was established in 1967 to spur national industrialisation. The government offered initiatives to encourage the local assembly of vehicles and manufacturing of automobile components. In 1983, the government became directly involved in the automotive industry through the establishment of national car company Proton, followed by Perodua in 1993. Since the 2000s, the government had sought to liberalise the domestic automotive industry through free-trade agreements, privatisation and harmonisation of UN regulations.

The Malaysian automotive industry is Southeast Asia's sole pioneer of indigenous car companies, namely Proton and Perodua. In 2002, Proton helped Malaysia become the 11th country in the world with the capability to fully design, engineer and manufacture cars from the ground up.[2] The Malaysian automotive industry also hosts several domestic-foreign joint venture companies, which assemble a large variety of vehicles from imported complete knock down (CKD) kits.

The automotive industry in Malaysia primarily serves domestic demand, and only several thousand complete built up (CBU) vehicles are exported annually.[3] Exports of Malaysian made parts and components have nonetheless grown significantly in the last decade, contributing over RM 11 billion to Malaysia's GDP in 2016.[1]

History

1780s–1950s

Malaysia during the British colonial era

Rubber plantation

Malaysia had been a British colony prior to its independence in the mid-20th century. West Malaysia was originally known as Malaya, and was governed separately from the would-be East Malaysian states of North Borneo and Sarawak. British colonisation of Malaya began in the late 18th century, and would encompass all of Malaya by the early 20th century. British rule in Malaya was divided between the Straits Settlements (which included Singapore), the Federated Malay States and the Unfederated Malay States.

During the colonial era, the Malayan economy was largely dependent on natural rubber and tin commodity exports.[4] Industrialisation in British Malaya was not emphasised due to the profitability and high demand for rubber and tin.[4] Malaya was strategically located along major ocean trade routes originating from East Asia and the Indian Ocean. Trade and commerce made British Malaya the most prosperous of all the European colonies in Southeast Asia.[4]

The boom of rubber and tin exports had funded the growth of the Malayan road network over the decades.[4] In 1911, there were over 4,000 miles of road in the Straits Settlements and the Federated Malay States.[5] By 1923, it was possible to drive from Singapore to Bangkok on the Malayan north-south highway.[5] Car ownership in Malaya had also increased ten-fold between 1910 and 1925.[5]

Western cars dominate

Imports of automobiles into British Malaya
by country of origin, 1925–1929[6]
Country 1925 1926 1927 1928 1929 Total
 United States 5,570 4,705 2,100 2,233 2,708 17,316
 United Kingdom 2,064 2,621 2,495 1,759 2,207 11,146
 Canada N/A 2,618 2,411 1,183 1,412 7,624
 Italy 527 667 253 316 831 2,594
 France 200 453 491 100 138 1,382
Others 635 199 303 139 113 1,389
Total 8,996 11,263 8,053 5,730 7,409 41,451

The earliest automobiles arrived in Malaya during the 1890s and 1900s.[5] Western car companies from America, the British Empire and Continental Europe had established a strong foothold in Malaya by the 1910s.[5] The automobile market in colonial Malaya was relatively small, and catered mainly to British expatriates and wealthy ethnic Chinese entrepreneurs in major cities such as Singapore, Penang, Kuala Lumpur and Ipoh.[5]

In the early 20th century, American car companies collectively held the largest share of the Malayan car market.[6] The British administration made attempts to restrict the advancement of American cars in Malaya, as a means of protecting British business interests.[6] American cars were subject to tariffs and periodical bans, while cars from Britain were allowed to be sold duty-free in Malaya.[7][8] However, American cars were often cheaper despite the costly taxes, and some companies found ways to circumvent the tax restrictions altogether.[7]

The reign of Ford Malaya

The automobile industry in British Malaya was pioneered by the Ford Motor Company.[9] Ford sought to capitalise on existing Anglo-American ties to expand globally, and Malaya was recognised for its strategic potential as a regional export base.[7] Ford's entry into Malaya was spearheaded by Ford Canada, an affiliate of Ford USA.[7] Ford Canada was set up in 1904 to capitalise on its British colony status, which allowed it to export automobiles duty-free to the various Empire colonies.[10] Ford Canada appointed Dodge & Seymour to handle sales in Asia, and the first Ford models were shipped into Malaya in 1909.[11] Malayan Ford sales grew in the following years, and Ford Canada decided to take direct control of its Malayan operations in 1926.[11]

In November 1926, the Ford Motor Company of Malaya Ltd. (Ford Malaya) was incorporated in Singapore, and the company set up a small garage in a two-storey shop house on Anson Road.[9][12] The garage carried out wheel-fitting and touching up for Model T units between 1926 and 1929.[11] In January 1930, Ford Malaya moved operations to a warehouse in Prince Edward Road, where they carried out more sophisticated semi-knock down (SKD) assembly.[9][12] The new plant assembled SKD kits which were imported from Ford Canada and Ford England.[11] Ford's market share in British Malaya peaked at 80% in 1939.[11]

The former Ford Malaya plant in modern day Singapore

In April 1941, Ford Malaya moved operations to their all-new assembly plant in Bukit Timah, Singapore.[12][13] The 1941 Ford Malaya factory became the first fully-fledged automobile assembly plant in Southeast Asia.[11] Complete-knock down (CKD) body assembly commenced in October 1941. However, World War II broke out in Malaya just two months later, and Singapore fell to the invading Japanese Army in February 1942.[13] The Ford Malaya plant became the venue where British General Percival formally surrendered to General Yamashita of Japan.[13] During the occupation of Singapore, the Japanese used the Ford plant to assemble Nissan and Toyota trucks for the military.[13] Following Japan's surrender in 1945, the British army reacquired the plant and returned it to Ford Malaya in 1946, and production recommenced in April 1947.[11]

Between 1926 and 1965, Ford Malaya stood as the sole automobile assembler in Singapore.[11] Throughout its history, Ford Malaya would export its produce to British Malaya (later West Malaysia), British Borneo (later East Malaysia and Brunei), Siam (later Thailand), the Dutch East Indies (later Indonesia), Burma, India and Pakistan.[11] Ford Malaya had imported SKD and CKD kits from the United States, Canada, Britain, Germany and Australia respectively.[11] Ford Malaya produced over 150,000 automobiles over the decades, and finally closed down in 1980.[11] The government of Singapore would later gazette the old Ford factory as a national monument in February 2006.[11]

Attempts by General Motors

In the mid-1920s, General Motors (GM) of America had also expressed intentions to establish a regional hub in British Malaya. In mid-1926, GM approached the British administration in Singapore and requested permission to build an assembly plant in the affluent Tanjong Katong area.[14] However, the local British authorities denied GM's application on grounds that it would 'spoil the amenities of the Katong residential area'.[14] In light of the situation, GM decided to set up their regional assembly plant in the Dutch East Indies instead.[15]

In late 1926, a General Motors delegation approached the Dutch administration in Java. GM was granted permission to set up an assembly plant near Batavia, and in February 1927, N.V. General Motors Java Handel Maatschappij (GM Java) was established.[16] The all-new GM Java plant, the colony's first automobile assembly plant, commenced production in May 1927.[17] GM Java exported its produce throughout the Dutch East Indies, British Malaya, French Indochina and Siam.[17]

On the onset of World War II, the Dutch East Indies fell to the invading Japanese Army in March 1942.[16] The GM Java plant was taken over by Toyota, and was used to assemble trucks for the military.[17] After the Japanese surrender in 1945, the Dutch failed to regain control of their colony, and the Indonesian War of Independence broke out and dragged on for a further four years.

In July 1947, General Motors revived plans for an assembly plant in Singapore.[18] The new plant would assemble cars and trucks from components imported from GM's subsidiaries in Canada and Britain.[18] Operations would begin in early 1948, and the plant would serve all of GM Java's former export markets, in addition to parts of southern China.[18] However, in June 1948, the local British administration banned imports of American cars into Malaya and Singapore, and GM was once again forced out of Singapore.[8][19] Following the 1950 Indonesian independence, GM's plant in Java was restructured, and became the Djakarta Branch of the GM Overseas Corporation.[17] However, in April 1956, GM's shareholders liquidated the Djakarta Branch, and General Motors sold their Indonesian plant to P.N. Gaja Motors.[16]

1950s

Independence and industrialisation

In 1956, British imports accounted for 65% of new vehicle sales in Malaya.[20] (Morris Minor pictured)

In August 1957, Malaya gained its independence and the Federation of Malaya was formed. Singapore, Sarawak and North Borneo remained British crown colonies. In the late 1950s, the Malayan government began to emphasise industrialisation as a more dependable sector for economic stability and growth.[21] Global tin and natural rubber demand witnessed large slumps and fluctuations throughout the early 20th century, and the mass production of synthetic rubber during World War II also had severe implications on the future sustainability of Malayan rubber exports.[4]

The Malayan government initially pursued a policy of Import Substitution Industrialisation (ISI), in line with most developing countries of that period.[21] ISI develops self-sufficiency through the creation of a strong domestic market, and is primarily state-driven through nationalisation, subsidisation, increased taxation and protectionist trade policies. The earliest Malaysian-made goods produced as a result of the new ISI policy included batteries, tires and paints.[4]

1960s

Formation of Malaysia

In September 1963, the Federation of Malaya with the Crown Colonies of Singapore, Sarawak and North Borneo merged to form Malaysia. The merger had granted the latter three states their independence. The new joint Malaysian-Singaporean governments later announced plans to establish an ISI-based national automotive industry, as per the recommendation of advisers from the Colombo Plan.[22] The Malaysian Minister of Commerce and Industry, Lim Swee Aun, would become a key figure in the formation of Malaysia's automotive industry.[22]

The 1964 Malaysian automotive policy aimed to accelerate national industrialisation through the local assembly of vehicles and manufacturing of automobile components. The government would issue manufacturing licenses to both foreign and local companies who were interested in setting up automobile assembly plants in any Malaysian state, including Singapore.[23] The government would reduce imports of complete-built up (CBU) vehicles by means of quota regulations and tariffs, and locally assembled (SKD or CKD) vehicles with Malaysian manufactured components would be granted reductions in import duties, making them cheaper and more competitive as a result.[23]

The Mk1 Ford Cortina became Malaysia's best-selling car in 1964.[24] It was built at the Ford Malaya plant in Singapore.[25]

By setting up local assembly plants, the government hoped to create more job opportunities and establish a market for Malaysian-made parts (local content) such as tires, paints, batteries, electrical cables, upholstery and other rubber-based goods.[26] The government hoped that the gradual increase of local content and technology transfer over the next decade or two would eventually bring about cars that are fully 'Made in Malaysia'.[26]

By May 1964, nineteen firms, both foreign and local, had responded to the government's call for local assembly and parts production.[27]

Singapore separates from Malaysia

In August 1965, Singapore separated from Malaysia amid escalating political tensions, and both governments began to compete for foreign investment.[27] In 1966, ten automobile firms banded together to establish the Motor Vehicle Assemblers Association (MVAA), and pleaded for a common automotive market between Malaysia and the newly independent Singapore.[28] The MVAA argued that local assembly would prove economically unsustainable if both governments refused to co-operate.[28] The combined markets of Malaysia and Singapore stood at around 33,000 vehicles a year, with Singapore accounting for 25% of sales.[28]

However, political differences dominated and the MVAA common market proposal was refused.[27] The Malaysian government later restricted automobile imports from Singapore and revised its automotive policy, forcing investors to choose between the two countries.[27] The Singaporean government later presented its own automotive policy in 1967.[29] It was largely identical to the original Malaysian policy, with only minor changes to local content definitions. By 1970, both Malaysia and Singapore boasted a roughly equal number of assembly plants. The Singaporean plants were almost entirely backed by British and German companies, while the vast majority of Japanese companies backed Malaysian plants exclusively.[29][30]

The Singaporean automotive industry showed strong initial promise, but was ultimately short lived. Rising costs, low local content, competition from Japanese cars, limited exports and a small domestic market had made local assembly unsustainable by the mid-1970s.[31] In July 1979, the Singaporean government announced plans to abolish preferential treatment for all local assemblers by the end of 1980.[32] By July 1980, all major car assembly plants in Singapore had shut down.[32]

The automotive industry in Malaysia begins

In mid-1967, the Malaysian government approved applications for six automobile assembly plants.[30][33][34]

Pioneer assembly plants of 1967 and 1968
Name of plant Ownership
(inception)
Investment
(inception)
Location Commenced operations
(first roll-out)
Capacity
(inception)
Marques assembled
(up to June 1971)[35]
Debut models
Kilang Pembena Kereta-Kereta (KPKK)[36] Sharikat Fiat Distributors (100%) RM 2.0 million[36] Tampoi August 1967[34] 3,000[36] Fiat, Colt, Alfa Romeo Fiat 600, 850 and 124[34]
Swedish Motor Assemblies (SMA)[37] AB Volvo (50%)
Federal Auto Company (50%)[38]
RM 3.3 million[38] Shah Alam November 1967[37] 2,500[38] Volvo, Datsun Volvo 144S[38]
Champion Motors (CM)[39] Motor Investments Berhad (100%)[39] RM 8.6 million[39] Shah Alam March 1968[39] 6,000[39] Volkswagen, Toyota, Vauxhall, Mercedes-Benz, Chevrolet, Land Rover, Bedford, Audi Volkswagen 1300 and Type 2
Toyota Corolla and Corona[39]
Capital Motor Assembly (CMA)[40] Capital Motor Assembly Corporation (100%) RM 5.0 million[40] Tampoi May 1968[41] 2,000 Opel, Datsun, Honda Opel Rekord and Kadett[41]
Associated Motor Industries Malaysia (AMIM)[42] Wearne Brothers Limited (100%) RM 8.0 million[43] Shah Alam June 1968[43] 7,500[43] Renault, Ford, Holden, British Leyland (Albion, Austin, Morris), Rootes (Hillman, Commer), International Harvester Renault R10[43]
Asia Automobile Industries (AAI)[44] Peugeot S.A. (36.4%)
Toyo Kogyo Co. (36.4%)
Asia Motor Company (27.2%)
RM 6.0 million[44] Petaling Jaya November 1968[44] 5,000[44] Mazda, Peugeot Mazda 1200
Peugeot 204[44]

1970s

Era of the Japanese car

By 1980, Japanese marques had captured 80% of the West Malaysian market.[45] (Datsun 120Y pictured)

For over six decades (1890s–1950s), Western car companies dominated the Malayan automobile market. But in the late 1950s, Japanese car companies rose to challenge the status quo. The tides shifted dramatically over the course of the 1960s, and by the end of the 1970s, Japanese car companies had become the dominant players in the Malaysian market.[46]

The first Japanese cars arrived in Malaysia during the mid 1950s.[47] Initially, the Japanese cars proved unpopular, and were perceived as inferior to their Western counterparts.[47] The lightness and thin construction of the early Japanese cars were often criticised, and popularised the derogatory term 'Milo tin' in the 1960s.[47] In addition to the quality concerns, anti-Japanese sentiment was still strong in 1950s and 1960s Malaysia, owing to bitter memories from the Japanese occupation several years prior.[47]

However, the Japanese cars continued to improve and gained a reputation for quality, reliability, high fuel efficiency and value for money.[48] The Japanese cars were also on average cheaper than their more premium Western counterparts.[47] Only a handful of Western companies such as Ford, Morris and Fiat were able to match the affordability of the Japanese cars.

Datsun (later Nissan) lead the rise of Japanese cars in Malaysia.[47] The greatest threat to Datsun's dominance came from another Japanese brand, Toyota.[47] Both Toyota and Datsun battled fiercely for pole position in the Malaysian market, at times only fractions apart in total market share.[47] Other Japanese car companies such as Mazda, Colt (later Mitsubishi) and Honda had also become well-established in Malaysia by the 1970s.

Inflation of car prices

West Malaysia passenger car sales comparison
1971[49] 1981[50]
No. Make Sales No. Make Sales
1 Datsun 4,485 1 Datsun 21,465
2 Toyota 3,210 2 Toyota 14,925
3 Ford 2,307 3 Mitsubishi 10,273
4 Mercedes-Benz 2,271 4 Mazda 10,092
5 Mazda 1,987 5 Honda 9,550
6 Peugeot 1,797 6 Ford 4,701
7 Volvo 1,483 7 Volvo 2,254
8 Colt 1,386 8 Daihatsu 2,242
9 Fiat 1,316 9 Mercedes-Benz 2,092
10 Austin 1,270 10 Opel 1,099

Prices of new cars in Malaysia had inflated significantly through the 1970s, with most if not all locally assembled CKD models generally costing more to produce than an equivalent CBU import.[51]

The inflation of new car prices was attributed to several factors, including low efficiency and inadequate economies of scale among the parts manufacturers and assembly plants, the government's mandatory CKD deletion policy, high import and excise taxes for the CKD models, and various others.[51] Additionally, the automotive industry in Malaysia was held back by a small domestic market, and manufacturers primarily served domestic demand and did not emphasise exports, thus limiting the growth and competitiveness of the industry as a whole.[51]

1980s

The National Car Project

By the dawn of the 1980s, the government concluded that direct involvement was necessary to reverse losses and spur future industrial growth. The National Car Project was drafted in the early 80s with the objective of accelerating technology transfer, increasing and rationalising local content, and involving more bumiputera entrepreneurs in the then largely ethnic Chinese dominated Malaysian automotive industry. The National Car Project would lead to the founding of Perusahaan Otomobil Nasional Sdn. Bhd. (Proton) in May 1983, and the launch of the Proton Saga in July 1985.

Malaysian automotive market

Annual sales

TIV

Sales of new passenger and commercial vehicles in Malaysia, 1967–2016
Sales of new passenger and commercial
vehicles in Malaysia, 1967–2023 [52]
Year Volume Growth
1967 16,615 N/A
1968 15,190 Decrease 8.6%
1969 23,560 Increase 55.1%
1970 27,177 Increase 15.4%
1971 30,787 Increase 13.3%
1972 33,291 Increase 8.1%
1973 49,532 Increase 48.8%
1974 55,608 Increase 12.3%
1975 56,337 Increase 1.3%
1976 52,781 Decrease 6.3%
1977 72,142 Increase 36.7%
1978 76,033 Increase 5.4%
1979 58,473 Decrease 23.1%
1980 105,896 Increase 81.1%
1981 100,935 Decrease 4.7%
1982 102,447 Increase 1.5%
1983 108,314 Increase 5.7%
1984 109,915 Increase 1.5%
1985 94,999 Decrease 13.6%
1986 67,847 Decrease 28.6%
1987 48,996 Decrease 27.8%
1988 71,592 Increase 46.1%
1989 109,357 Increase 52.8%
1990 165,861 Increase 51.7%
1991 181,877 Increase 9.7%
1992 145,084 Decrease 20.2%
1993 167,928 Increase 15.7%
1994 200,435 Increase 19.4%
1995 285,792 Increase 42.6%
1996 364,788 Increase 27.6%
1997 404,837 Increase 11.0%
1998 163,851 Decrease 59.5%
1999 288,547 Increase 76.1%
2000 343,173 Increase 18.9%
2001 396,381 Increase 15.5%
2002 434,954 Increase 9.7%
2003 405,745 Decrease 6.7%
2004 487,605 Increase 20.2%
2005 552,316 Increase 13.3%
2006 490,768 Decrease 11.1%
2007 487,176 Decrease 0.7%
2008 548,115 Increase 12.5%
2009 536,905 Decrease 2.0%
2010 605,156 Increase 12.7%
2011 600,123 Decrease 0.83%
2012 627,733 Increase 4.6%
2013 655,744 Increase 4.46%
2014 666,487 Increase 1.64%
2015 666,677 Increase 0.03%
2016 580,085 Decrease 12.99%
2017 576,625 Decrease 0.6%
2018 598,714 Increase 3.83%
2019 604,287 Increase 0.93%
2020 529,514 Decrease 12.37%
2021 508,911 Decrease 3.89%
2022 720,658 Increase 41.60%
2023 799,731 Increase 10.97%

Manufacturers sales

Manufacturers sales of new passenger and commercial vehicles in Malaysia, 2003–2020[53][54]
Manufacturer 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020
Malaysia Hicom 4,192 4,605 - 4,175 3,931 - 3,508 4,366 1,518 129 16 - - - - - - -
Malaysia Inokom 176 15,683 - 6,776 9,874 - 5,392 5,573 5,337 - - - - - - - - -
Malaysia Naza 7,754 10,377 - 31,763 20,286 - 11,119 9,362 9,347 7,953 3,236 12 2 - - - - -
Malaysia Perodua 124,008 121,804 - 155,419 162,152 - 166,736 188,641 179,989 189,137 196,071 195,579 213,307 207,110 204,887 227,243 240,341 220,163
Malaysia Proton 157,313 168,616 - 115,706 118,134 - 148,031 157,274 158,657 141,121 138,753 115,783 102,174 72,290 70,992 64,744 100,183 108,524
Malaysia TD Cars - - - 1 - - - - - - - - - - - - - -
Japan Daihatsu 5,637 5,911 - 5,333 5,055 - 3,990 2,989 2,118 1,452 1,156 1,207 967 885 803 991 1,409 1,410
Japan Hino 981 1,902 - 2,024 2,262 - 3,014 4,590 5,829 6,433 7,002 6,380 4,929 5,901 5,002 5,808 5,520 3,697
Japan Honda 17,087 24,857 - 26,527 28,478 - 38,783 44,483 32,480 34,950 51,544 77,495 94,902 91,830 109,511 102,282 85,418 60,468
Japan Isuzu 1,258 1,168 - 2,131 3,119 - 5,378 6,144 9,299 10,673 12,061 12,366 12,655 12,818 10,979 11,178 8,983 8,820
Japan Lexus - - - - 195 - 304 431 1,711 1,471 1,336 1,601 2,101 1,353 953 1,011 918 819
Japan Mazda 917 1,155 - 778 1,059 - 1,444 4,325 6,028 6,332 9,197 11,382 14,325 12,493 9,730 16,038 11,651 12,141
Japan Mitsubishi 6,715 4,692 - 2,806 4,414 - 6,981 11,899 12,054 11,652 12,348 14,322 11,076 9,395 7,034 9,261 8,140 9,163
Japan Mitsubishi Fuso - - - 1,150 1,300 - 1,391 1,795 1,756 2,180 2,532 2,288 2,430 2,407 2,170 2,307 1,841 1,638
Japan Nissan 18,143 24,263 - 22,578 18,569 - 31,493 34,701 32,276 36,271 53,156 46,352 47,235 40,706 27,154 28,610 21,239 14,160
Japan Subaru - 12 - 31 10 - 40 24 17 53 1,084 1,644 2,539 3,873 4,782 5,175 2,864 1,222
Japan Suzuki 227 253 - 1,606 2,583 - 4,994 6,748 7,308 8,087 4,962 4,273 3,351 87 - - - -
Japan Toyota 40,239 51,700 - 81,808 81,993 - 81,785 91,559 86,951 105,151 91,185 102,035 93,760 63,757 69,492 65,551 69,091 58,501
Japan UD Trucks - - - - - - - - - - - - 1,037 970 865 676 446 420
South Korea Hyundai - 16,133 - 5,413 3,735 - 2,562 4,931 6,469 11,938 12,217 10,271 6,286 5,100 4,110 2,949 2,256 1,400
South Korea Kia 7,079 13,053 - 7,941 3,158 - 3,164 968 1,741 4,374 7,184 9,926 4,674 4,370 4,131 5,658 3,432 759
South Korea SsangYong - 1,054 - 658 579 - 102 281 257 238 292 207 109 - - - - -
Germany Audi - - - - - - 435 741 927 1,414 3,102 1,630 1,515 986 684 150 - -
Germany BMW 2,145 2,574 - 3,302 3,162 - 3,564 4,006 5,000 6,318 7,057 7,808 7,515 9,000 10,618 12,008 9,300 8,836
Germany MAN 151 77 - 91 88 - 105 112 277 168 234 130 221 226 240 180 68 80
Germany Maybach - - - - - - - 1 - - - - - - - - - -
Germany Mercedes-Benz 3,306 3,387 - 3,805 3,994 - 4,156 5,144 5,710 5,905 5,550 7,131 11,034 12,017 12,344 13,462 10,535 -
Germany Porsche 24 49 - 76 74 - 74 126 415 395 275 349 567 430 395 342 367 399
Germany Smart - 26 - 322 566 - - - - - - - - - - - - -
Germany Volkswagen - - - - 757 - 885 2,810 7,350 13,003 9,538 8,916 6,405 6,048 6,536 7,001 5,559 3,379
United States Chevrolet - 5,906 - 991 1,211 - 557 540 1,272 2,026 1,673 1,792 952 953 499 234 3 -
United States Ford 4,652 4,401 - 3,458 2,781 - 1,826 2,857 7,188 7,108 10,660 13,938 12,130 8,001 6,255 6,755 5,641 5,170
France Citroën 396 752 - 188 32 - - - - - - - - - - - - -
France Peugeot - - - - - - 1,258 2,562 5,345 6,114 6,505 5,498 2,986 1,710 1,924 2,302 1,897 1,035
France Renault 107 192 - 836 644 - 246 216 132 90 44 259 478 599 592 1,009 1,218 911
Sweden Saab 22 39 - 21 2 - - - - - - - - - - - - -
Sweden Scania 110 187 - 279 210 - 433 443 483 466 577 712 518 349 486 568 492 187
Sweden Volvo 1,097 1,256 - 1,039 1,133 - 706 839 1,006 937 861 1,211 601 947 1,027 1,413 1,883 1,950
Sweden Volvo Trucks - - - - - - - - - - - - 353 370 380 450 478 283
United Kingdom Jaguar - - - - - - - - - - - 36 90 80 57 42 20 33
United Kingdom Land Rover 587 724 - 295 421 - 72 189 220 643 1,003 844 659 254 161 216 173 162
United Kingdom Mini - - - 170 184 - 214 222 301 341 437 655 829 902 1,011 1,200 1,142 982
Italy Fiat - 169 - - - - - - - - - - - - - - - -
Italy Iveco 3 - - - - - - - - - - - - - - - - -
Italy Lamborghini - - - - - - - - - - - - - 7 4 - - -
Turkey BMC 138 38 - 19 3 - - - - - - - - - - - - -
China Auman - - - - - - - - - 51 151 128 163 94 54 56 56 32
China BAW - - - - - - - - 19 27 29 16 17 17 11 2 - -
China BeiBen - - - - - - - - - 33 70 49 36 28 13 27 48 15
China Bison - - - - - - - - 239 305 191 211 111 83 123 211 173 141
China CAM/Sendok - - - - - - - - - - - - - - - 442 499 310
China CAMC - - - - - - - - - 253 372 558 396 188 209 182 74 53
China Chana - - - - - - - - - 100 226 341 529 217 95 77 123 131
China Chery - - - 152 332 - 1,871 3,041 2,997 1,636 740 350 296 491 137 - - -
China Dongfeng - - - 337 211 - 155 155 19 - - - - - - - - -
China Foton - - - - - - - - - - - - - - - - 121 127
China Grand Tiger - - - - - - - - - 51 20 26 21 13 3 - - -
China Great Wall - - - - - - - - 3 173 281 85 - - - - - -
China Hoka - - - - - - - - - - - - - - - 1 - -
China JAC - - - - - - - - - 134 200 280 147 106 74 59 61 51
China JBC - - - - - - - - 87 181 157 88 55 27 43 12 36 5
JMC - - - - - - - - - - - - - - - 41 44 36
China Kama - - - - - - - - - - - - - - - 2 - -
China King Long - - - - - - - - - - - - - - - 118 55 61
China Sinotruk - - - - - - - - - 285 483 282 134 - - 651 425 221
China Tuah - - - 258 108 - 46 16 3 - - - - - - - - -
China Yutong - - - - - - - - - - 16 41 44 26 2 - - -
India Mahindra - - - 177 95 - 47 52 10 1 9 - - - - - - -
India Tata 546 590 - 328 282 - 44 - - - - - 16 571 53 53 64 84
Manufacturer 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020

Top-selling manufacturers

Top 15 manufacturers in Malaysia by market share of new passenger and commercial vehicle sales, 1969–2020[55][49][56][57][45][58][59][50][60][61][62][63][64][65][66][54][53][67]
Year Manufacturers
Position 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
1969
P/C
Volkswagen Toyota not available Ford
(11.9%)
Mercedes-Benz Austin Morris Peugeot Datsun
(5.4%)
Mazda not available
1970
P/C
Datsun
(13.0%)
Ford
(11.9%)
Mercedes-Benz
(8.6%)
Toyota
(8.4%)
Fiat
(6.2%)
Volkswagen
(5.9%)
Peugeot
(5.9%)
Austin
(5.5%)
Mazda
(4.8%)
Morris
(4.3%)
Volvo
(3.8%)
Colt
(3.5%)
not available
1971
P/C
Datsun
(15.8%)
Toyota
(11.4%)
Ford
(8.2%)
Mercedes-Benz
(8.0%)
Mazda
(7.0%)
Peugeot
(6.4%)
Volvo
(5.3%)
Colt
(4.9%)
Fiat
(4.6%)
Austin
(4.5%)
Volkswagen
(4.0%)
Morris
(3.9%)
not available
1972 not available
1973
P/C
Toyota not available
1974
P/C
Toyota
(16.0%)
Datsun
(15.7%)
Ford
(12.5%)
Mazda
(9.7%)
Peugeot
(6.8%)
Colt
(6.5%)
Mercedes-Benz
(6.5%)
Fiat
(5.4%)
Opel
(3.5%)
not available
1975
P/C
Toyota
(15.0%)
Datsun
(14.9%)
Ford
(11.1%)
Mazda
(10.9%)
Colt/Mitsubishi
(6.4%)
Fiat
(6.0%)
Mercedes-Benz
(5.7%)
Peugeot
(5.3%)
Opel
(4.6%)
Morris
(2.5%)
not available
1976
P/C
Toyota
(17.1%)
Datsun
(16.9%)
Mazda
(10.7%)
Ford Mitsubishi Opel Mercedes-Benz Honda Peugeot Bedford not available
1977
P/C
Datsun
(19.2%)
Toyota
(17.4%)
not available
1978
P/C
Datsun
(22.0%)
Toyota
(13.8%)
not available
1979
P/C
Toyota
(14.6%)
Datsun
(13.5%)
not available
Position 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
1980
P/C
Datsun
(26.7%)
Toyota
(20.0%)
Mitsubishi Honda Mazda Mercedes-Benz Ford not available
1981
P
Datsun Toyota Mitsubishi Mazda Honda Ford Volvo Daihatsu Mercedes-Benz Fiat Opel Suzuki Subaru Alfa Romeo Peugeot
11M 1982
P
Datsun Toyota Honda Mazda Mitsubishi Ford Daihatsu Volvo Mercedes-Benz Opel not available
1983 not available
1984
P
Nissan
(27.5%)
Toyota
(22.2%)
Honda
(13.0%)
not available
1985
P
Nissan
(29.9%)
Toyota
(21.7%)
Proton
(11.0%)
Honda
(9.1%)
Ford
(6.5%)
Mazda
(6.2%)
Daihatsu
(5.1%)
Volvo
(2.8%)
Mercedes-Benz
(1.8%)
BMW
(1.1%)
not available
1986
P
Proton
(46.8%)
Nissan
(15.0%)
Toyota
(10.6%)
Honda
(7.9%)
Ford
(4.7%)
Mazda
(3.9%)
Daihatsu
(3.4%)
Volvo
(1.8%)
Mercedes-Benz
(1.1%)
BMW
(0.6%)
not available
1987
P
Proton
(64.8%)
Nissan
(9.7%)
Honda
(6.2%)
Toyota
(4.3%)
Ford
(3.1%)
Mazda
(3.0%)
Volvo
(2.7%)
Daihatsu
(2.0%)
Mercedes-Benz
(1.8%)
BMW
(0.9%)
not available
1988
P
Proton
(73.2%)
Nissan
(8.1%)
Honda
(5.9%)
Toyota
(5.5%)
Volvo
(2.0%)
Daihatsu
(1.8%)
Ford
(1.0%)
Mercedes-Benz
(0.6%)
BMW
(0.6%)
Mazda
(0.4%)
not available
1989
P
Proton
(65.6%)
Nissan
(11.7%)
Honda
(8.0%)
Toyota
(5.5%)
Daihatsu
(2.4%)
Volvo
(2.1%)
Ford
(1.8%)
BMW
(1.1%)
Mercedes-Benz
(0.9%)
not available
Position 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
1990
P/C
Proton
(40%)
Nissan
(12.7%)
Toyota
(11.0%)
Ford Daihatsu Honda Isuzu Mitsubishi Mazda Volvo not available
1991
P/C
Proton
(44.5%)
Toyota
(11.0%)
Nissan
(10.1%)
not available Ford not available
1992
P/C
Proton
(52.2%)
Toyota Nissan Honda Daihatsu Ford not available
1993
P/C
Proton
(58.5%)
Toyota
(7.6%)
Nissan
(7.3%)
Honda
(5.8%)
not available
1994
P/C
Proton
(56.3%)
Toyota Nissan Honda Daihatsu Perodua
(4.5%)
not available
1995
P/C
Proton
(50.1%)
Perodua
(14.2%)
Toyota Nissan Daihatsu not available Ford not available Mercedes-Benz not available
1996
P/C
Proton
(49.3%)
Perodua
(15.2%)
Toyota Honda Nissan Daihatsu Isuzu not available
1997
P/C
Proton
(49.5%)
Perodua
(17.3%)
Toyota Nissan Honda Isuzu Daihatsu not available
1998
P/C
Proton
(53.2%)
Perodua
(27.3%)
Toyota Nissan Honda not available
1999
P/C
Proton
(54.0%)
Perodua
(28.6%)
Toyota
(4.8%)
Nissan
(3.4%)
Honda
(1.6%)
Ford
(1.1%)
Mitsubishi
(1.0%)
Hicom
(0.9%)
Daihatsu
(0.9%)
Isuzu
(0.7%)
Suzuki
(0.6%)
Mercedes-Benz
(0.4%)
BMW
(0.4%)
Mazda
(0.3%)
Volvo
(0.3%)
Position 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
2000
P/C
Proton
(52.1%)
Perodua
(28.3%)
Toyota
(5.5%)
Nissan
(4.0%)
Ford
(1.8%)
Honda
(1.6%)
Mitsubishi
(0.9%)
Hicom
(0.9%)
Daihatsu
(0.8%)
Mercedes-Benz
(0.7%)
BMW
(0.6%)
Volvo
(0.6%)
Mazda
(0.4%)
Isuzu
(0.4%)
Suzuki
(0.3%)
2001
P/C
Proton
(52.9%)
Perodua
(27.9%)
Toyota
(5.7%)
Nissan
(4.1%)
Ford
(1.8%)
Mitsubishi
(1.4%)
Honda
(1.2%)
Daihatsu
(0.9%)
Hicom
(0.8%)
Mercedes-Benz
(0.7%)
Isuzu
(0.6%)
BMW
(0.5%)
Volvo
(0.4%)
Suzuki
(0.3%)
Mazda
(0.2%)
2002
P/C
Proton
(49.4%)
Perodua
(29.3%)
Toyota
(6.3%)
Nissan
(3.7%)
Mitsubishi
(1.9%)
Kia
(1.5%)
Honda
(1.4%)
Ford
(1.4%)
Daihatsu
(1.0%)
Hicom
(0.9%)
Mercedes-Benz
(0.8%)
BMW
(0.6%)
Isuzu
(0.4%)
Volvo
(0.3%)
Mazda
(0.2%)
2003
P/C
Proton
(37.2%)
Perodua
(29.3%)
Toyota
(9.5%)
Inokom/Hyundai Nissan Honda Naza/Kia Mitsubishi Daihatsu Ford Hicom Mercedes-Benz BMW Volvo Hino
2004
P/C
Proton
(34.6%)
Perodua
(25.0%)
Toyota Inokom/Hyundai Honda Naza/Kia Nissan Daihatsu Chevrolet Mitsubishi Hicom Ford Mercedes-Benz BMW Hino
2005
P/C
Proton
(30.3%)
Perodua
(25.4%)
Toyota
(16.5%)
Naza/Kia Honda Inokom/Hyundai Nissan not available Ford not available
2006
P/C
Perodua
(31.7%)
Proton
(23.6%)
Toyota
(16.7%)
Naza
(6.5%)
Honda
(5.4%)
Nissan
(4.6%)
Kia
(1.6%)
Inokom
(1.4%)
Hyundai
(1.1%)
Daihatsu
(1.1%)
Hicom
(0.9%)
Mercedes-Benz
(0.8%)
Ford
(0.7%)
BMW
(0.7%)
Mitsubishi
(0.6%)
2007
P/C
Perodua
(33.3%)
Proton
(24.2%)
Toyota
(16.8%)
Honda
(5.8%)
Naza
(4.2%)
Nissan
(3.8%)
Inokom
(2.0%)
Daihatsu
(1.0%)
Mitsubishi
(0.9%)
Mercedes-Benz
(0.8%)
Hicom
(0.8%)
Hyundai
(0.8%)
BMW
(0.6%)
Kia
(0.6%)
Isuzu
(0.6%)
6M 2008
P/C
Perodua
(30.1%)
Proton
(26.2%)
Toyota
(19.1%)
Honda
(6.0%)
Nissan
(5.4%)
Naza
(2.4%)
Inokom
(1.4%)
Mitsubishi
(1.2%)
Daihatsu
(1.0%)
Suzuki
(0.9%)
Isuzu
(0.8%)
Mercedes-Benz
(0.8%)
Hicom
(0.8%)
BMW
(0.7%)
Hyundai
(0.7%)
2009
P/C
Perodua
(31.1%)
Proton
(27.6%)
Toyota
(15.2%)
Honda
(7.2%)
Nissan
(5.9%)
Naza
(2.1%)
Mitsubishi
(1.3%)
Inokom
(1.0%)
Isuzu
(1.0%)
Suzuki
(0.9%)
Mercedes-Benz
(0.8%)
Daihatsu
(0.7%)
BMW
(0.7%)
Hicom
(0.7%)
Kia
(0.6%)
Position 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
2010
P/C
Perodua
(31.2%)
Proton
(26.0%)
Toyota
(15.1%)
Honda
(7.4%)
Nissan
(5.7%)
Mitsubishi
(2.0%)
Naza
(1.5%)
Suzuki
(1.1%)
Isuzu
(1.0%)
Inokom
(0.9%)
Mercedes-Benz
(0.9%)
Hyundai
(0.8%)
Hino
(0.8%)
Hicom
(0.7%)
Mazda
(0.7%)
2011
P/C
Perodua
(30.0%)
Proton
(26.4%)
Toyota
(14.5%)
Honda
(5.4%)
Nissan
(5.4%)
Mitsubishi
(2.0%)
Naza
(1.6%)
Isuzu
(1.5%)
Volkswagen
(1.2%)
Suzuki
(1.2%)
Ford
(1.2%)
Hyundai
(1.1%)
Mazda
(1.0%)
Hino
(1.0%)
Mercedes-Benz
(1.0%)
2012
P/C
Perodua
(30.1%)
Proton
(22.5%)
Toyota
(16.8%)
Nissan
(5.8%)
Honda
(5.6%)
Volkswagen
(2.1%)
Hyundai/Inokom
(1.9%)
Mitsubishi
(1.9%)
Isuzu
(1.7%)
Suzuki
(1.3%)
Naza
(1.3%)
Ford
(1.1%)
Hino
(1.0%)
Mazda
(1.0%)
BMW
(1.0%)
2013
P/C
Perodua
(29.9%)
Proton
(21.2%)
Toyota
(13.9%)
Nissan
(8.1%)
Honda
(7.9%)
Mitsubishi
(1.9%)
Hyundai/Inokom
(1.9%)
Isuzu
(1.8%)
Ford
(1.6%)
Volkswagen
(1.5%)
Mazda
(1.4%)
Kia
(1.1%)
BMW
(1.1%)
Hino
(1.1%)
Peugeot
(1.0%)
2014
P/C
Perodua
(29.3%)
Proton
(17.4%)
Toyota
(15.3%)
Honda
(11.6%)
Nissan
(7.0%)
Mitsubishi
(2.1%)
Ford
(2.1%)
Isuzu
(1.9%)
Mazda
(1.7%)
Hyundai/Inokom
(1.5%)
Kia
(1.5%)
Volkswagen
(1.3%)
BMW
(1.2%)
Mercedes-Benz
(1.1%)
Hino
(1.0%)
2015
P/C
Perodua
(32.0%)
Proton
(15.3%)
Honda
(14.2%)
Toyota
(14.1%)
Nissan
(7.1%)
Mazda
(2.1%)
Isuzu
(1.9%)
Ford
(1.8%)
Mitsubishi
(1.7%)
Mercedes-Benz
(1.7%)
BMW
(1.1%)
Volkswagen
(1.0%)
Hyundai/Inokom
(0.9%)
Hino
(0.7%)
Kia
(0.7%)
2016
P/C
Perodua
(35.7%)
Honda
(15.8%)
Proton
(12.5%)
Toyota
(11.0%)
Nissan
(7.0%)
Isuzu
(2.2%)
Mazda
(2.2%)
Mercedes-Benz
(2.1%)
Mitsubishi
(1.6%)
BMW
(1.6%)
Ford
(1.4%)
Volkswagen
(1.0%)
Hino
(1.0%)
Hyundai/Inokom
(0.9%)
Kia
(0.8%)
2017
P/C
Perodua
(35.5%)
Honda
(19.0%)
Proton
(12.3%)
Toyota
(12.1%)
Nissan
(4.7%)
Mercedes-Benz
(2.1%)
Isuzu
(1.9%)
BMW
(1.8%)
Mazda
(1.7%)
Mitsubishi
(1.2%)
Volkswagen
(1.1%)
Ford
(1.1%)
Hino
(0.9%)
Subaru
(0.8%)
Kia
(0.7%)
2018
P/C
Perodua
(38.0%)
Honda
(17.1%)
Toyota
(10.9%)
Proton
(10.8%)
Nissan
(4.8%)
Mazda
(2.7%)
Mercedes-Benz
(2.2%)
BMW
(2.0%)
Isuzu
(1.9%)
Mitsubishi
(1.5%)
Volkswagen
(1.2%)
Ford
(1.1%)
Hino
(1.0%)
Kia
(0.9%)
Subaru
(0.9%)
2019
P/C
Perodua
(39.8%)
Proton
(16.6%)
Honda
(14.1%)
Toyota
(11.4%)
Nissan
(3.5%)
Mazda
(1.9%)
Mercedes-Benz
(1.7%)
BMW
(1.5%)
Isuzu
(1.5%)
Mitsubishi
(1.3%)
Ford
(0.9%)
Volkswagen
(0.9%)
Hino
(0.9%)
Kia
(0.6%)
Subaru
(0.5%)
2020
P/C
Perodua
(41.6%)
Proton
(20.5%)
Honda
(11.4%)
Toyota
(11.0%)
Nissan
(2.7%)
Mazda
(2.3%)
Mitsubishi
(1.7%)
BMW
(1.7%)
Isuzu
(1.7%)
Ford
(1.0%)
Hino
(0.7%)
Volkswagen
(0.6%)
Volvo
(0.4%)
Fuso
(0.3%)
Mercedes-Benz
(U)[54]
Position 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

Top-selling models

Top 10 best-selling models in Malaysia (new passenger and commercial vehicles), 1964–2022
Sources : MMTA / MAA, BSCB, Fiat Group World, data.gov.my[24][55][49][57][68][69][67][70][71][72][73][74][75][76][77][78]
Table indicators

  Mini (A) / Small (B) Car        Medium (C) / Large (D) Car        Van / MPV (M)        Crossover / SUV (J)        Pickup / Truck      X B CBU import

Year Models and Ranking Year
1st 2nd 3rd 4th 5th 6th 7th 8th 9th 10th
4M 1964 Ford Cortina not available 4M 1964
1965–1969 not available
1970 Toyota Corolla 1200 Datsun 1200 Volkswagen 1300 Volvo 144 Mazda 1200 not available 1970
1971 Datsun 1200 Toyota Corolla 1200 Volvo 144 Colt Galant 1300 not available 1971
1972–1975 not available
1976 Toyota Corolla Datsun 120Y not available 1976
1977–1982 not available
1983 Nissan Sunny Toyota Corolla Honda Accord not available 1983
1984 Nissan Sunny Toyota Corolla Honda Accord 1984
1985 not available
1986 Proton Saga not available 1986
1987 Proton Saga 1987
1988 Proton Saga 1988
1989 Proton Saga 1989
1990 Proton Saga Nissan Vanette Ford Econovan Toyota LiteAce Honda Accord Toyota Corolla Daihatsu Delta Honda Civic Nissan Sunny Nissan Sentra 1990
1991 Proton Saga Nissan Vanette Honda Accord Ford Econovan Toyota LiteAce Nissan Sunny Toyota Corolla Honda Civic Daihatsu Delta Toyota HiAce 1991
1992 Proton Saga Iswara Toyota Corolla Nissan Sunny Honda Civic Toyota LiteAce Honda Accord Daihatsu Delta Nissan Vanette Ford Laser Ford Econovan 1992
1993 Proton Saga Iswara Proton Wira Honda Accord Toyota Corolla Nissan Sunny Honda Civic Nissan Vanette Daihatsu Delta Daihatsu Charade Toyota HiAce 1993
1994 Proton Wira Proton Saga Iswara Perodua Kancil Honda Accord Toyota Corolla Toyota HiAce Honda Civic Daihatsu Delta Nissan Vanette Mitsubishi Pajero 1994
1995 Proton Wira Proton Saga Iswara Perodua Kancil Proton Satria Proton Perdana Toyota HiAce Nissan Vanette Honda Accord Toyota Corolla Honda Civic 1995
1996 Proton Wira Proton Saga Iswara Perodua Kancil Proton Satria Honda Civic Nissan Vanette Proton Tiara Daihatsu Delta Toyota HiAce Isuzu Elf 1996
1997 Proton Wira Perodua Kancil Proton Saga Iswara Proton Satria Proton Tiara Perodua Rusa Honda Civic Nissan Vanette Isuzu Elf Toyota Land Cruiser 1997
1998 Proton Saga Iswara Perodua Kancil Proton Wira Proton Satria Perodua Kembara Daihatsu Charade Perodua Rusa Toyota Unser Honda Civic Toyota HiAce 1998
1999 Proton Wira Perodua Kancil Proton Saga Iswara Perodua Kembara Proton Satria Toyota Unser Proton Tiara Proton Perdana V6 Nissan Vanette Daihatsu Charade 1999
2000 Proton Wira Perodua Kancil Proton Saga Iswara Perodua Kembara Proton Perdana V6 Proton Waja Proton Satria Toyota Unser Perodua Kenari Nissan Vanette 2000
2001 Proton Wira Perodua Kancil Proton Waja Proton Saga Iswara Perodua Kembara Toyota Unser Perodua Kelisa Perodua Kenari Proton Perdana V6 Proton Satria 2001
2002 Proton Wira Perodua Kancil Proton Waja Proton Saga Iswara Perodua Kelisa Perodua Kenari Toyota Unser Perodua Kembara Proton Satria Nissan Vanette 2002
2003 Proton Wira Perodua Kancil Proton Waja Proton Saga Iswara Perodua Kelisa Perodua Kenari Toyota Unser Inokom Atos Perodua Kembara Toyota Vios 2003
2004 Perodua Kancil Proton Saga (LMST) Proton Wira Proton Waja Perodua Kelisa Perodua Kenari Proton Gen-2 Toyota Vios Inokom Atos Naza Ria 2004
2005 Perodua Kancil Proton Wira Proton Waja Toyota Avanza Proton Saga Perodua Myvi Proton Gen-2 Perodua Kelisa Perodua Kenari Toyota Vios 2005
2006 Perodua Myvi Perodua Kancil Proton Wira Proton Saga Toyota Avanza Proton Waja Proton Gen-2 Perodua Kelisa Toyota Vios Naza Citra 2006
2007 Perodua Myvi Perodua Viva Proton Saga Toyota Avanza Toyota Vios Perodua Kancil Proton Persona Proton Wira Toyota HiLux Proton Waja 2007
2008 Perodua Myvi Perodua Viva Proton Saga (BLM) Proton Persona Toyota Vios Toyota Avanza Toyota Camry B Toyota HiLux Nissan Grand Livina Proton Saga (LMST) 2008
2009 Perodua Myvi Proton Saga Perodua Viva Proton Persona Toyota Vios Honda City Proton Exora Toyota HiLux Nissan Grand Livina Toyota Avanza 2009
2010 Perodua Myvi Proton Saga Perodua Viva Proton Persona Perodua Alza Toyota Vios Proton Exora Honda City Toyota HiLux Nissan Grand Livina 2010
2011 Perodua Myvi Proton Saga FLX Perodua Viva Proton Persona Perodua Alza Toyota Vios Toyota HiLux Proton Exora Nissan Grand Livina Honda City 2011
2012 Perodua Myvi Proton Saga FLX Perodua Viva Perodua Alza Toyota Vios Toyota HiLux Proton Persona Proton Exora Proton Prevé Honda City 2012
2013 Perodua Myvi Proton Saga FLX Perodua Viva Perodua Alza Nissan Almera Toyota HiLux Toyota Vios Proton Exora Proton Prevé Proton Persona 2013
2014 Perodua Myvi Proton Saga FLX Perodua Alza Toyota Vios Honda City Perodua Viva Perodua Axia Toyota HiLux Nissan Almera Proton Persona 2014
2015 Perodua Axia Perodua Myvi Proton Saga FLX Perodua Alza Honda City Toyota Vios Nissan Almera Toyota HiLux Honda HR-V Proton Iriz 2015
2016 Perodua Axia Perodua Alza Perodua Myvi Proton Saga Honda HR-V Perodua Bezza Honda City Toyota Vios Nissan Almera Proton Iriz 2016
2017 Perodua Axia Perodua Myvi Perodua Bezza Honda City Proton Saga Perodua Alza Toyota Vios Proton Persona Honda HR-V Toyota HiLux 2017
2018 Perodua Myvi Perodua Axia Perodua Bezza Honda City Proton Saga Perodua Alza Toyota HiLux Toyota Vios Proton Persona Honda Civic 2018
2019 Perodua Myvi Perodua Axia Perodua Bezza Proton Saga Honda City Perodua Aruz Proton X70 Toyota Vios Proton Persona Honda HR-V 2019
2020 Perodua Myvi Perodua Axia Perodua Bezza Proton Saga Proton Persona Perodua Aruz Proton X70 Honda City Toyota Vios Perodua Alza 2020
2021 Perodua Myvi Perodua Axia Perodua Bezza Proton Saga Toyota Vios/Yaris Proton X50 Perodua Ativa Toyota HiLux Honda City Proton X70 2021
2022 Perodua Myvi Perodua Bezza Perodua Axia Proton Saga Honda City Proton X50 Perodua Ativa Toyota HiLux Perodua Alza Toyota Vios 2022
2023 Perodua Bezza Perodua Myvi Perodua Axia Proton Saga Perodua Alza Perodua Ativa Proton X50 Honda City Toyota HiLux Proton Persona 2023
1st 2nd 3rd 4th 5th 6th 7th 8th 9th 10th
See also : Best-selling models in

Vehicle population

According to the Ministry of Transport, the active passenger car population in Malaysia stood at 11 million units in 2014, with 10 passenger cars for every 27 citizens.[79] An independent study estimated that the population stood at around 8.2 million units in 2014, after factoring in variables such as scrapped and permanently disabled passenger cars.[80][81]

Malaysian automotive manufacturers

Proton

The first generation Proton Saga was produced at the original Shah Alam plant for 22 years.[82]

National car company Proton currently operates three manufacturing plants in Malaysia, with a combined maximum annual capacity of 360,000 units.[83][84] The original Proton plant in Shah Alam was built in 1985, and was later complemented by the smaller MVF plant in 2000. The third Proton factory near Tanjung Malim commenced operations in 2004, and was built as part of the Proton City project. Perusahaan Otomobil Nasional (PONSB) handles operations at both plants in Shah Alam, while Proton Tanjung Malim (PTMSB) operates the plant at Proton City.[85][86]

The Proton Waja became the debut model for the MVF plant.

Proton's first plant commenced operations in mid-1985, with the first unit being a Proton Saga 1.3L saloon.[82] Initially, Proton had assembled the Saga with complete-knock down (CKD) kits, engines and components which were imported from Mitsubishi's facilities in Japan.[87] Local content in the 1985 Proton Saga stood at 18%, with just 13 local components.[87] By mid-1989, local content had risen to 69%, with over 453 Proton-manufactured components and a further 356 locally-sourced parts from 56 local vendors.[88] In June 1989, Proton commenced engine assembly at their dedicated Engine and Transmission Factory.[88] The Proton plant became a symbol of national industrialisation, and was subsequently commemorated on the RM100 banknote in 1998.

The Proton GEN•2 is the first model to roll out of the Tanjung Malim plant.

Construction of the Medium Volume Factory (MVF) was completed in 2000.[89][90][91][92] The MVF plant was built adjacent to the original Proton factory, and produced the Proton Waja upon its debut.[90] The MVF plant was built at a cost of RM400 million, and accommodated modern assembly practices like modular assembly and Automatic Line Control (ALC).[89][90][92]

Construction of an all-new Proton factory commenced in 1996 near Tanjung Malim, in anticipation of increasing sales of Proton cars in the near future.[93] However, its construction was deferred in late 1997 as a result of the Asian financial crisis.[93] Construction resumed in January 2001, and was completed in 2003, and the plant's first Proton GEN•2 models rolled-off the production line in early 2004.[93] Proton's Tanjung Malim complex is five times larger than their Shah Alam complex, and was built at a cost of RM1.8 billion.[93] At its debut in 2004, the Tanjung Malim plant employed 2,000 workers, featured 180 robots, and had a 60% automation rate.[93] It was billed as the most advanced automobile factory in the Asia-Pacific region, outside Japan and Korea.[93]

Proton was originally owned in majority by HICOM with minority stakes being held by Mitsubishi Group members. By 2005, Mitsubishi had divested their stake in Proton to Khazanah Nasional, and in 2012, Proton was fully acquired by DRB-HICOM. In 2017, DRB-HICOM sold a 49.9% stake in Proton to Geely.

Perodua

Market sales leader Perodua currently operates two manufacturing plants in Malaysia, with a combined maximum annual capacity of 350,000 units.[94] The first Perodua plant in Serendah commenced operations in 1994, and was later complemented by a larger adjacent factory in 2014. Perodua Manufacturing (PMSB) handles operations at the older plant, while Perodua Global Manufacturing (PGMSB) operates the newly built factory.[94]

The Perodua Kancil was produced for 15 years at the original Serendah plant.

Perodua's first plant commenced operations in July 1994, with the first unit being a Perodua Kancil 660cc.[95][96][97] Like Proton, Perodua benefited from Japanese technology transfer in its early stages of development. Perodua's products are based on Daihatsu-engineered platforms and engines, and Daihatsu has led Perodua's manufacturing operations since 2001.[98] Perodua had previously assembled the first generation Toyota Avanza under contract, and the company currently produces models with Daihatsu badging for export to the Indonesian market.[99]

The Perodua Axia became the debut model for PGMSB.

In December 2012, Perodua announced plans for an all-new factory, to be built adjacent to their original plant in Serendah.[100] Construction commenced in March 2013, and completed in late 2014, and the plant's first Perodua Axia models rolled-off the production line in August 2014.[101] The all-new Perodua plant was built at a cost of RM1.3 billion, and is modelled after Daihatsu Motor Kyushu (DKC) Nakatsu Plant 2 in Japan.[101][102] Perodua aims to emulate DKC's low defects per unit (DPU) rate and environmentally friendly practices.[102]

In May 2014, Perodua and Daihatsu revealed plans for an all-new RM600 million engine manufacturing plant, to be built in Sendayan.[103] Construction commenced in October 2014, and operations commenced in May 2016.[104][105] The new engine plant is handled by Daihatsu Perodua Engine Manufacturing (DPEM), and currently produces the 1.3-litre, 1NR-VE and 1.5-litre, 2NR-FE engines for the Perodua Bezza and Malaysian-market Toyota Vios.[106] Additionally, Perodua has a 10% stake in the Akashi Kikai (AKIM) transmission manufacturing plant, also in Sendayan.[107] The all-new AKIM plant commenced operations in March 2014, and currently supplies manual and automatic gearboxes for Perodua's models.[107]

Tan Chong Motor

Tan Chong Motor Holdings (TCMH) currently operates two manufacturing plants in Malaysia, with a combined maximum annual capacity of 100,000 units.[108] Tan Chong Motor Assemblies (TCMA), a subsidiary of TCMH, handles all plant operations. TCMA assembles a large variety of foreign badged models from imported complete knock down (CKD) kits. The original TCMA plant in Segambut was built in 1976, and currently assembles Subaru, Mitsubishi and Renault models, in addition to various commercial vehicles.[109][110][111] The second TCMA plant in Serendah commenced operations in 2007, and assembles Nissan models exclusively.[112]

The TCMA-assembled Datsun 120Y was a best-seller in Malaysia.[48]

Tan Chong Motor has been an active player in the Malaysian automotive industry since 1957.[113] The company sold fully imported Datsun vehicles in its early years of business, but government initiatives prompted Tan Chong Motor to offer their first locally assembled Datsun models from mid-1968.[47] Sales of Datsun cars grew significantly in the 1960s, and in 1970, Datsun became the best-selling brand of car in the Malaysian market.[47][113] In mid-2003, Tan Chong Motor adopted the Renault brand in line with the Renault–Nissan Alliance.[114][115]

The Nissan Vanette became TCMA's first export model.[116]

Tan Chong Motor constructed their own assembly plant at Segambut in 1976.[113] The new TCMA plant was modelled after the Nissan Zama complex, and was the nation's first to use electro-dipping (ED) technology for its painting process.[47] Nissan Japan regarded the TCMA plant as the third best foreign Nissan assembly plant in the world.[117] The TCMA plant also became the nation's first to feature an engine assembly line in December 1988.[117][118] TCMA had also pioneered women's rights in the traditionally male dominated automotive industry, with females accounting for 44% of their assembly workforce in 1989.[119][120]

TCMA exported Subaru SUVs to Thailand and Indonesia.

The bulk of TCMA Segambut production historically consisted of Datsun/Nissan vehicles, but the plant has also carried out contract assembly for Subaru, Volkswagen, Audi, Peugeot and Renault models in the past.[117][121] A small number of Malaysian-assembled Mercedes-Benz models were also sent to TCMA for painting.[121] The TCMA Segambut plant has mainly catered to domestic consumption, and only a small number of vehicles were exported.[113] Presently, both Subaru XV and Forester models assembled by TCMA Segambut are exported to Thailand and Indonesia, with export volume exceeding domestic consumption.[122][109]

Construction for an all-new TCMA assembly plant at Serendah commenced in February 2006.[113] The new plant complements the existing Segambut facility, and incorporate more advanced manufacturing standards under the Nissan Production Way (NPW).[121] The Nissan Latio became the first model to roll off the new TCMA Serendah plant in 2007.[113] Tan Chong Motor/Nissan is one of only two domestic-foreign joint venture companies to simultaneously operate two automobile assembly plants in Malaysia.

Honda Malaysia

Honda Malaysia (HM) currently operates an assembly plant in Pegoh, with a combined maximum annual capacity of 100,000 units.[123] HM assembles Honda passenger cars from imported complete knock down (CKD) kits. Honda Malaysia's shareholders include the Honda Motor Company (51%), DRB-HICOM (34%) and Oriental Holdings (15%).[124][123]

Oriental Holdings held the Honda franchise prior to Honda Malaysia.[125] Honda cars were assembled in Malaysia since 1969.[41]

Honda Malaysia was established in July 2000 as DRB-Oriental-Honda (DOH), a three-way joint venture between Honda, DRB-HICOM and Oriental.[124] DOH was established to handle assembly, distribution and sales of Honda passenger cars in Malaysia.[124] DRB-Oriental-Honda changed its name to Honda Malaysia (HM) in September 2002.[126] Prior to the advent of Honda Malaysia, Honda operations in Malaysia were handled by Oriental Holdings and their associates, which collectively held the franchise rights for both Honda passenger cars and motorcycles in Malaysia.[125] Honda passenger cars were assembled at the Oriental Assemblers plant in Tampoi, Johor, while Honda motorcycles were built at the Boon Siew Honda Assembly plant in Butterworth, Penang. Both plants had produced Honda models since 1969.

The second generation Honda CR-V became the debut model for the Pegoh plant.

By the late 1990s, Honda's principles in Japan had sought to become more directly involved in the Malaysian market. The decision was made in anticipation of the impending AFTA implementation in the early 2000s, a period in which many foreign car companies had increased their market presence in Malaysia.[127] Additionally, various complications between Honda and the Oriental Group had also catalysed Honda's decision to establish a direct presence in the Malaysian market.[125]

Under the DRB-Oriental-Honda joint venture, Oriental Holdings would concentrate on the marketing and sales of Honda vehicles, while Honda would handle assembly operations.[125] The DOH joint venture only encompassed Honda passenger vehicles, while Honda motorcycle operations remained unchanged. Additionally, Honda had decided on the construction of an all-new assembly plant in Pegoh, Malacca, which would take over Honda assembly operations from Oriental Assemblers.[128] Construction of the new plant commenced in August 2001, and was completed in November 2002.[127] The Pegoh plant was built at the cost of RM180 million, with an initial capacity of 20,000 units annually.[127] The earliest second generation Honda CR-V models rolled out of the Pegoh plant in December 2002.[129] In addition to vehicle assembly, the Pegoh plant also manufactures constant velocity joints for both domestic and export markets.[127] The plant produced its 100,000th car, a Honda Civic in November 2007.[129]

The Honda Jazz Hybrid (GE) became the first hybrid car to be assembled in Malaysia.[130]

In November 2013, Honda Malaysia established a second vehicle assembly line at the Pegoh plant.[131] The second line was built at the cost of RM382 million, and doubled annual production capacity from 50,000 to 100,000 units annually.[131] Honda Malaysia's second line also became the first outside Japan to feature Honda's Smart Welding Machine technology.[131]

Honda Malaysia produced its 600,000th unit in March 2017.[132]

Honda Malaysia's production, sales and market share grew significantly in the 2010s.[123] In 2015, Honda surpassed arch-rival Toyota as the best-selling foreign-badged car company in Malaysia.[133] The following year, Honda surpassed Proton to place second overall in the Malaysian market.[133] Honda Malaysia currently assembles seven different models, the highest among any Japanese-badged car company in Malaysia.[132] HM also assembles hybrid variants of the Jazz and City respectively.

Inokom

Inokom Corporation operates an assembly plant in Kulim with a combined maximum annual capacity of 30,000 units. Inokom is the licensed contract assembler for Hyundai, BMW and Mazda passenger vehicles in Malaysia. Inokom's shareholders include Sime Darby Motors (51%), Sime Darby Hyundai (5%), Hyundai Motor Company (15%) and Berjaya Auto (29%).[134]

Inokom became the first to produce the Hyundai Ioniq outside Korea.

Inokom was established in 1992 as one of two national commercial vehicle companies. In its early years of business, Inokom produced rebadged Renault and Hyundai commercial vehicles exclusively. The company's first product, the Inokom Permas debuted in 1998.[135] The Permas is based on the first generation Renault Traffic and was produced in various configurations at Inokom's new plant in Kulim, Kedah.[136] In 2000, Inokom launched its second product, the Lorimas, a license-built Hyundai Porter.[137]

In 2002, Inokom ventured into non-commercial vehicle production with the launch of the Hyundai-based Inokom Atos.[138] In 2004, Sime Darby acquired a 51% stake in Inokom, and by the 2010s, all Hyundai assembly operations in Malaysia were centralised at the Inokom plant.[138] Prior to the consolidation, Hyundai models were assembled at two separate plants, namely the Inokom plant in Kulim and the Oriental Assemblers plant in Tampoi.

Inokom exports BMW cars to the Philippines.
Inokom exports Mazda SUVs to Thailand.

Inokom's acquisition by Sime Darby also led to the assembly of BMW and Land Rover models at the Inokom plant in 2008.[138] BMW and Land Rover vehicles were previously assembled at the Associated Motor Industries plant in Shah Alam. In 2018, local assembly of BMW engines commenced at a new engine assembly plant, while exports of Inokom-built BMWs commenced in 2019.[139][140]

Mazda assembly at Inokom commenced in 2011 under a separate initiative by the Berjaya Group.[138] Inokom has also carried out contract assembly for Dongfeng, Jinbei and Ford commercial vehicles.[138]

Volvo Car Manufacturing Malaysia

Volvo Car Manufacturing Malaysia (VCMM) operates an assembly plant in Shah Alam with an annual capacity of 10,000 units. VCMM assembles Volvo passenger cars for both domestic and export markets. Volvo Car Manufacturing Malaysia is a wholly owned subsidiary of Sweden-based Volvo Car Corporation. The 50-year-old VCMM plant is the oldest automobile assembly plant in Malaysia, and is widely credited as one of the pioneers of the Malaysian automotive industry.

The Volvo 144 became the debut model for the Swedish Motor Assemblies plant.[38]
SMA carried out contract assembly for various car companies, such as Alfa Romeo.[141]
VCMM's export demand currently exceeds domestic sales.[142]

The VCMM plant was established as Swedish Motor Assemblies (SMA) in September 1966 through a joint venture between AB Volvo and the Federal Auto Company Sdn. Bhd.[38] Swedish Motor Assemblies was established in response to a government-proposed initiative to the set up an automotive industry in Malaysia.[141] Construction of the SMA plant commenced in March 1967, and was completed in October 1967.[38] The first Volvo 144 units rolled-off the assembly line in November 1967.[38][143] By 1971, SMA had commenced assembly of Volvo trucks and buses.[37]

Throughout its history, Swedish Motor Assemblies had assembled a wide variety of Volvo passenger and commercial vehicles. SMA had also conducted contract assembly operations for various car companies, including Datsun, Alfa Romeo, Daihatsu, Subaru, Suzuki, Renault, Land Rover, Mazda and Perodua among others.[144][141] At times, SMA's production volume for non-Volvo cars vastly exceeded that of Volvo-badged cars.[145]

However, by the beginning of the 2010s, contract assembly operations at the SMA plant had scaled down, as SMA consolidated operations to focus on Volvo production exclusively.[146] By 2013, Swedish Motor Assemblies had changed its name to Volvo Car Manufacturing Malaysia, to better reflect its current identity.[146][147]

The SMA plant historically catered to the Malaysian market, with intermittent low volume exports to neighbouring countries. In 2016, VCMM announced plans to facilitate exports to regional left-hand drive markets, and as of 2018, export demand had outpaced domestic sales.[148][142] VCMM currently exports right-hand drive models to Thailand and Indonesia, and left-hand drive units to Taiwan, Vietnam, and the Philippines.[142]

Assembly Services

Assembly Services Sdn. Bhd. (ASSB) currently operates two assembly plants with a combined annual capacity of 150,000 units.[149][150] The original ASSB Shah Alam plant was built in 1968, and was later complemented by the all-new ASSB Bukit Raja plant in 2019. ASSB assembles Toyota passenger and commercial vehicles from imported complete knock down (CKD) kits. Assembly Services is a wholly owned subsidiary of UMW Toyota Motor Sdn. Bhd. (UMWT), which is in turn a subsidiary of UMW Holdings (51%), Toyota Motor Corporation (39%) and Toyota Tsusho Corporation (10%).[149] Assembly Services was established in 1967 as Champion Motors (CM), then a subsidiary of the Inchcape group. Champion Motors was renamed Assembly Services in 1975, prior to its acquisition by UMW and Toyota in 1982. The original ASSB plant is among the oldest automobile assembly plants in Malaysia, and one of the few to surpass the 1 million cumulative production milestone.[151]

Toyota's history in Malaysia can be traced back to the mid 1940s. During the Japanese occupation of Malaya, Toyoda (as Toyota was then known) military trucks were among those produced at the occupied Ford Malaya plant in Singapore.[13] After the war, Toyota returned to Malaysia in the late 1950s, and the sales and reputation of Toyota vehicles grew over course of the 1960s. However, the Toyota brand franchise in Malaysia was constantly beset with obstacles and problems, and the franchise would change hands multiple times before settling with its current owner, the UMW group.

The first generation Corolla became the first Toyota model to be assembled in Malaysia.[151]

Toyota's first appointed Malaysian distributor was the Asia Motor Company, founded by the Ph'ng family from Penang. Asia Motor imported the Toyota Land Cruiser (FJ25) into Malaya in August 1957, as well as the Toyota Truck (FA70) the following year.[152][153] However, Asia Motor's contract soon expired, and in September 1960, Toyota signed a new distributor agreement with Kah Motor, a wholly owned subsidiary of Penang-based Oriental Holdings, chaired by Loh Boon Siew. Kah Motor imported Toyota and Toyopet passenger cars such as the Tiara and Publica for sale in Malaya and Singapore.[154] In December 1963, Kah Motor and Toyota announced plans for a Toyota assembly plant in Butterworth, in response to the Malaysian government's proposal to set up a domestic automotive industry.[155][156]

Champion Motors assembled a wide variety of vehicles, including the Chevrolet Impala.[157]
ASSB produced its 1,000,000th vehicle in April 2011.[151]

However, various complications occurred in the following years, and in 1967, Toyota signed a separate distributor agreement with Borneo Motors, a subsidiary of London-based Inchcape.[158][159] That same year, Borneo Motors' sister company, Motor Investments (MIB) commenced construction of the Champion Motors (CM) assembly plant in Shah Alam.[39] In February 1968, the first Malaysian-assembled Toyota models rolled out of the Champion Motors plant. In addition to Toyota models, Champion Motors also assembled Volkswagen,[160] Vauxhall, Chevrolet and Mercedes-Benz models in its initial years of operations.[39] Although not an official Toyota plant, Champion Motors benefited significantly from Japanese technology transfer by adopting the Toyota Production System.[151] By the 1970s, Toyota models had accounted for the largest share of Champion Motors' production.[151] In July 1975, Champion Motors was renamed Assembly Services (ASSB). Apart from Borneo Motors, Toyota had also granted the franchise rights for Toyota commercial vehicles (Hilux and Land Cruiser) to other Malaysian companies such as Emastorin Motor and Sarin Motor, the latter of which oversaw Land Cruiser assembly at the Sarawak Motor Industries (SMI) plant for the East Malaysian market.[161]

ASSB produces the HiAce for both Malaysia and Thailand.[162]

By the dawn of the 1980s, various complications had brought about yet another franchise transition.[163] In 1981, negotiations between Toyota and United Motor Works (UMW), led by Eric Chia culminated in UMW's appointment as the new Toyota franchise holder in Malaysia.[164][165] The following year, UMW, through its subsidiary Sejati Motor acquired the Assembly Services plant and Borneo Motors network from Inchcape. By 1983, Toyota operations in both West and East Malaysia were unified, and in 1987, Sejati Motor was renamed UMW Toyota Motor (UMWT). The UMW group has held the Toyota franchise ever since.

UMW Toyota's second plant commenced operations in 2019.[150]

The Assembly Services plant is further supplemented by sister companies of UMW Toyota, most notably Automotive Industries (AISB) and Toyota Boshoku UMW (TBU) which manufacture exhaust systems and interior components respectively.[151][166] UMW Toyota subsidiaries also supply components to non-Toyota plants in Malaysia and abroad.[151] Additionally, Toyota is the sole foreign car company to carry out body panel stamping operations for select Malaysian-built models through its subsidiary, Toyota Auto Body Malaysia (TABM).[162] In 2016, UMW and Toyota announced plans for a second Toyota assembly plant in Bukit Raja, with a capital investment of RM2 billion.[149] Construction of the second plant was completed in late 2018, and operations commenced in January 2019 with the debut of the revised third generation Vios.[150]

Go Automobile Manufacturing

Go Automobile Manufacturing Sdn. Bhd. (GAM) currently operates an assembly plant in Gurun with an annual capacity of 25,000 units.[167] GAM assembles Haval and Great Wall Motors (GWM) vehicles for both domestic and export markets.[167] Go Automobile Manufacturing is a subsidiary of Malaysia-based Go Auto Group of Companies.[168] Go Auto is the appointed distributor, assembler and exporter of Haval and Great Wall Motors vehicles for the ASEAN region.[167]

The Wingle 5 pickup truck became the first Great Wall model to be assembled in Malaysia.[169]

The Go Auto plant was established in the late 2000s by MAZS Sdn. Bhd., a subsidiary of Green Oranges Sdn. Bhd. (GOSB).[170] In mid 2011, Green Oranges imported the first Great Wall vehicles into Malaysia, and local assembly operations commenced later that year.[169] In April 2014, Go Auto became the first company to be awarded with an Energy Efficient Vehicle (EEV) manufacturing license from MITI.[171] The Green Oranges plant was subsequently developed into Go Automobile Manufacturing, and further investments into a second, adjacent facility increased production capacity from 10,000 units annually to 25,000 units by 2015.[171][172] The Go Auto plant is located across the street from the Naza Automotive Manufacturing plant.[171][173]

Malaysia is Haval's production hub in Southeast Asia.[167]

The Go Auto plant employs a unique 'factory-in-factory' or 'Tier 0' approach, in which component suppliers or vendors are invited to directly participate in automobile assembly by setting up smaller factories within the larger plant itself.[173] Each vendor concentrates and specialises on a specific section of the assembly line, while Go Auto supervises the overall assembly process.[173] All vendors co-ordinate and co-operate with each other to solve problems and achieve high quality control standards.[173] The 'Tier 0' system aims to develop and enhance local vendor capabilities.[171]

In addition to Great Wall and Haval vehicles, Go Auto has also carried out contract assembly for Hafei, BAIC, Jinbei and Dongfeng commercial vehicles in recent years.[167][170][173] Go Auto has exported Haval SUVs to Thailand, Brunei, Indonesia and Cambodia.[171] The company has expressed plans to widen exports to additional ASEAN countries in the near future.

HICOM Automotive Manufacturers (Malaysia)

HICOM Automotive Manufacturers (Malaysia) Sdn. Bhd. (HA) currently operates two main assembly plants in Pekan, which collectively encompass several smaller sub-plants and facilities.[174] HA is part of the DRB-HICOM Pekan automotive complex, which is among the nation's largest automobile production hubs. The entire automotive complex is divided by a section of the Federal Route 3 highway, which separates HA Plant 1 to the West, from HA Plant 2 to the East. Plant 1 hosts the Volkswagen Pekan Plant (VPP), which produces Volkswagen passenger vehicles, and the Suzuki Malaysia Automobile plant, which is currently idle.[174] Plant 2 hosts the Mercedes-Benz Malaysia (MBM) plant, which produces Mercedes-Benz passenger and commercial vehicles, in addition to Mitsubishi Fuso commercial vehicles.[174] All three sub-plants assemble vehicles from imported knock down kits. Additionally, the DRB-HICOM Defence Technologies (DefTech) facility and Isuzu HICOM Malaysia (IHM) plant are both located in close proximity to Plant 1 and 2. DefTech and IHM are not part of HICOM Automotive Manufacturers (Malaysia), but DefTech is nonetheless a subsidiary of DRB-HICOM, while IHM is a 51:49 joint venture between Isuzu and HICOM.[175] The Pekan automotive complex has produced a diverse variety of vehicles over the course of its history, with models from over 20 different car companies, both domestic and foreign badged.[176]

AMM assembled several Citroën models, including the CX.[177]
The Pajero was one of several Mitsubishi vehicles assembled by AMM.

HICOM Automotive Manufacturers (Malaysia) traces its origins to the mid 1970s, when the TATAB Industries Assembly Plant (TIAP) was established under a 70:30 joint venture between Pahang-based TAB group and Tata of India. The development of the TIAP plant was partially funded by the Pahang royal family, and upon its completion in 1976, it became the first automobile assembly plant in the East Coast region. In the late 1970s and early 1980s, TIAP produced Tata commercial vehicles, but in 1983, the Master Carriage group, an affiliate company of Diversified Resources Berhad (DRB) bought the TIAP facility, and renamed it Automotive Manufacturers (Malaysia) Sdn. Bhd. (AMM).[177] Over the course of the mid 1980s and early 1990s, the AMM plant would take on contract assembly for Isuzu, Suzuki and Mitsubishi commercial vehicles, as well as Citroën passenger vehicles.[176]

By late 1994, the AMM complex had grown to accommodate 8 separate assembly lines.[178] In July 1995, AMM commenced operations at a second assembly plant, AMM 2, on the eastern bank of the Federal Route 3 highway at the Peramu Jaya industrial estate.[179] AMM 2 was tasked with the assembly of commercial vehicles exclusively, while the original plant on the western bank, AMM 1, would specialise in passenger car assembly.[179] The combined annual production capacity of the AMM complex stood at around 80,000 units in late 1995.[179]

The HICOM Perkasa.

In the mid 1990s, AMM became one of two plants to participate in the National Commercial Vehicle (NCV) project, when HICOM Commercial Vehicles was established in January 1994 under a 40:40:20 joint venture between DRB, HICOM and Isuzu.[180] By 1996, HICOM Commercial Vehicles had been renamed Malaysian Truck & Bus (MTB), while DRB and HICOM had merged. MTB had acquired the AMM 2 plant for the NCV project, and plans for a HICOM-badged, Isuzu-based, AMM-built truck were unveiled.[179] In July 1997, the HICOM Perkasa was launched as the first product from the MTB joint venture. The Perkasa is based on the fifth-generation Isuzu Elf, and it was produced in both narrow-cab, short wheelbase and wide-cab, long wheelbase configurations. Isuzu vehicles have also formed the basis for other HICOM-badged vehicles, most notably the DefTech-built HICOM Handalan series. In 2007, Isuzu acquired a 51% majority stake in MTB, and the company was subsequently renamed Isuzu HICOM Malaysia.

Aside from the joint venture with Isuzu, AMM had also hosted a second concurrent partnership with national car company Proton. In June 1994, Usahasama Proton-DRB (USPD) was established under 51:30:19 joint venture between DRB, Proton and Erat Bakti.[178] USPD was established to market niche or non-mainstream Proton models, as a complement to HICOM-directed Edaran Otomobil Nasional (EON), which concentrated on mainstream Proton models.[181] By November 1994, production of the Proton Satria had commenced on a dedicated assembly line at the AMM complex.[178] By 1996, AMM had been granted an export certificate from Britain's Vehicle Certification Agency, and through its alliance with Proton, AMM became one of the few domestic plants to have ever exported cars to the United Kingdom.[176]

Several Proton models were produced at the AMM plant.[176]

By 1995, DRB's relationship with Citroen and Proton had converged into a tripartite joint venture by way of a Proton-badged, Citroen-based, AMM-built model.[177] The first and only model from the joint venture, the Proton Tiara, was launched in April 1996. Further plans were made for a second, Saxo-based model, and DRB had invested in additional plant capacity to accommodate future exports.[177] However, the three-way joint venture suffered multiple complications and setbacks, including the loss of then HICOM chairman Yahaya Ahmad in 1997, and the subsequent Asian financial crisis.[182] Production of the Tiara ceased in late 1999, but AMM continued to produce other Mitsubishi-based, Proton-badged vehicles up to the mid 2000s.[182][176] By late 2000, Proton had fully acquired USPD, and the company was subsequently renamed Proton Edar.[181]

AMM briefly produced Kia and Naza models under contract.

By the dawn of the 2000s, AMM had taken on contract assembly for additional companies. In October 2001, AMM entered into a contract assembly agreement with Naza, the appointed Kia Motors franchise holder in Malaysia.[183] Naza had sought to temporarily utilise AMM's facilities while construction of their own plant in Gurun took place.[183] Under the agreement with Naza, the AMM plant produced the Kia Spectra, Pregio and K2700, as well as Naza-badged vehicles such as the Ria and Sutera up to the mid 2000s.[176] By the 2010s, assembly of Kia and Naza vehicles had been fully relocated to the Naza Automotive Manufacturing plant. The AMM plant had also assembled SsangYong vehicles under another contract agreement with Competitive Supreme (CSSB).[176]

By the mid 2000s, the Pekan automotive complex had taken on assembly of Mercedes-Benz vehicles through a joint venture between DaimlerChrysler Malaysia (DCM) and Malaysian Truck & Bus (MTB). DaimlerChrysler Malaysia was a 51:49 joint venture between DaimlerChrysler AG, which owned Mercedes-Benz, and Cycle & Carriage Bintang (CCB), the long-standing Mercedes-Benz franchise holder in Malaysia.[184] Prior to the MTB and DCM joint venture, Mercedes-Benz vehicles were assembled concurrently at two different plants, namely Asia Automobile Industries in Petaling Jaya and Oriental Assemblers in Tampoi.[185] To better coordinate logistics and quality control, Mercedes-Benz had sought to consolidate their Malaysian assembly operations at a single plant.[186] Thus, in May 2004, Mercedes-Benz approached MTB through its subsidiary, DCM, and plans were made to shift Malaysian assembly of future Mercedes-Benz vehicles to the MTB plant.[185] DCM did not acquire an equity stake in MTB, but it was nonetheless allowed to operate autonomously, as Mercedes-Benz vehicles would be assembled on dedicated assembly lines, and only the paint shops would be shared with other companies at MTB and AMM.

The Mercedes-Benz V221 S500L is the most expensive car ever to be assembled in Malaysia. It cost 1 million ringgit in 2008.
MBM also assembles Mercedes-Benz and Mitsubishi Fuso commercial vehicles.

The first Mercedes-Benz cars from the DCM and MTB joint venture rolled off the assembly line in early 2005.[187] By 2007, Mercedes-Benz passenger models from the C, E and S-Class nameplates were being assembled on three separate assembly lines. Assembly of Mercedes-Benz commercial models and Mitsubishi Fuso vehicles also took place at an adjacent facility. In January 2008, DaimlerChrysler Malaysia was renamed Mercedes-Benz Malaysia, following the Mercedes-Benz and Chrysler demerger.[188] Since 2004, Mercedes-Benz has invested over RM300 million in their Pekan operations.[189] The Mercedes-Benz Malaysia plant has since produced nine different passenger models from the C-Class (W203, W204 and W205), E-Class (W211, W212 and W213), S-Class (V221 and V222), and GLC-Class (X253) nameplates respectively.[190] Since 2013, MBM has also produced hybrid and plug-in hybrid models, which benefit from extensive tax rebates under the government's EEV incentive. Production, sales and market share of Mercedes-Benz vehicles grew significantly in the 2010s, and cumulative volume has since surpassed 100,000 units. In late 2019, MBM commenced assembly of left-hand drive C-Class for export to the Philippines.[190]

HAMM assembled the Suzuki Swift. A small number were also exported to Brunei.

Around the time when MTB secured their contract assembly agreement with Mercedes-Benz, AMM had also received a separate contract deal for the assembly of Suzuki passenger cars when DRB-HICOM was awarded the Suzuki franchise for the Malaysian market. DRB-HICOM established Suzuki Malaysia Automobile (SMA) in December 2004, and plans were made to assemble the Suzuki Swift on a dedicated assembly line at the Pekan complex. Although low volumes were anticipated, Suzuki invested RM20 million to establish a robotic welding line to ensure quality control and efficiency.[191] The first Swift units from Suzuki Malaysia Automobile were produced in June 2007.[191]

In early 2008, Suzuki Malaysia Automobile became a three-way 40:40:20 joint venture between DRB-HICOM, Suzuki and Itochu, when the latter two acquired stakes in the operation.[192] In November 2008, AMM was renamed HICOM Automotive Manufacturers (Malaysia) Sdn. Bhd. (HAMM). Local assembly of the next generation Swift commenced in May 2013.[193] In June 2015, Suzuki and Proton entered into a partnership, in which selected Suzuki models would be rebadged and produced by Proton for the Malaysian market. To prevent sales overlapping between Proton and Suzuki models, Suzuki voluntarily withdrew from the Malaysian market, and local assembly, imports and sales of Suzuki-badged cars ceased by 2016. Suzuki's local assembly operations in Malaysia have since transitioned to Proton's Tanjung Malim plant by way of the Ertiga MPV.

The B7 Passat became the debut model for the Volkswagen Pekan Plant.

By the dawn of the 2010s, HAMM had commenced contract assembly of Volkswagen passenger vehicles as part of an agreement with DRB-HICOM and Volkswagen. Prior to the agreement with DRB-HICOM, Volkswagen had initially pursued a partnership with Proton. Volkswagen had sought to utilise Proton's new Tanjung Malim plant as their manufacturing hub in ASEAN, and had also planned to collaborate with Proton on the development of ASEAN-market models. Two rounds of discussions between Proton and Volkswagen took place between 2004 and 2007, but various complications and political intervention prevented further developments between the two companies. After the discussions with Proton ended inconclusively, Volkswagen signed a contract assembly agreement with DRB-HICOM instead.

The Volkswagen Pekan Plant (VPP) was set up within the Pekan complex, and the first VPP-built Volkswagen cars rolled off the assembly line in March 2012. VPP has since produced six different Volkswagen models from the Passat, Polo, Vento, Jetta and Tiguan nameplates.[194][176] VPP is also one of only two Malaysian plants to have used laser welding in the assembly process. The knock down kits and engines are shipped in from Volkswagen's plants in Germany, Mexico, India and South Africa. In late 2014, Volkswagen expressed intentions to export their Malaysian-built models to ASEAN markets, but various complications have since throttled Volkswagen's ASEAN expansion plans.[195]

In late 2016, HICOM Automotive Manufacturers (Malaysia) changed its abbreviation to HA, from HAMM previously. In July 2017, HA built a new paint shop at the cost of RM230 million. The new paint shop is highly automated, and is the nation's first to feature a 360-degree rotating electro-dipping (ED) process, which is more efficient than conventional vertical ED systems. Mercedes-Benz Malaysia's models are currently painted at the new paint shop.[189]

New National Car Project (NNCP)

The New National Car Project (NNCP) is the given name of an industrial initiative tasked with the development of a new Malaysian automobile company. The NNCP aims to create the third national car company after Proton and Perodua. The NNCP approach will not follow the government-funded, foreign technology-dependent formula used to create Proton and Perodua, but will instead be funded by domestic private sector institutions with primarily local talent and technologies. Nonetheless, there are plans to collaborate with foreign companies in the short term.

Prime Minister Mahathir Mohamad, the main proponent of the third national car, justifies the need for its existence as part of a long-term vision for Malaysia to develop self-sufficiency with high-tech industries and a highly-skilled labour force. Mahathir argues that a competitive automotive industry is a necessary pre-requisite for Malaysia to be considered a developed nation. Additionally, the sale of Proton to China-based Geely also contributed to the NNCP cause. Mahathir had championed Proton since its inception, and strongly objected to any foreign buyout of Proton. The NNCP is often cited as an indirect replacement to Proton, which Mahathir no longer regards as a truly Malaysian car company.

In October 2018, the Malaysian Industry-Government Group for High Technology (MIGHT), an agency under the Prime Minister's Department tasked to oversee the New National Car Project, announced that several companies have been shortlisted, including SilTerra, a Kulim-based semiconductor manufacturer, and Cyberjaya-based Composites Technology Research Malaysia (CTRM), a composite component manufacturer.[196] SilTerra is a wholly owned subsidiary of Khazanah Nasional, while CTRM is a unit of DRB-HICOM.[196] Both companies are government linked, but the government and Mahathir Mohamad have repeatedly promised that no public funds would be used to fund the NNCP.[196]

Additionally, MIGHT has unveiled that the NNCP will include semi-autonomous technology, and be built on a modular platform.[197] Both hybrid and battery electric powertrains are also under consideration.[197] To keep startup costs low and to shorten the overall launch frame, the NNCP vehicles may be produced at an existing automobile plant.[197] The NNCP has a targeted 2020 launch, with plans for ASEAN exports in the near future.[197]

In August 2019, the Ministry of International Trade and Industry shortlisted Cyberjaya-based DreamEdge as the company which will spearhead the NNCP, with technical assistance from Daihatsu.[198] MITI reiterated that the NNCP will be privately funded and domestically owned.[198] The first NNCP product, reportedly a plus-sized B-segment sedan with a standard ICE or hybrid powertrain, will launch in early 2021.[198] Additionally, it has since been hinted that Perodua may also become involved in the NNCP due to its pre-existing joint-venture with Daihatsu.[199] Later, it was announced that the NNCP launch would be delayed to early 2022, while overall investment costs are estimated to reach RM1 billion.[199]

See also

Notes

References

  1. ^ a b c "The Automotive Industry". mai.org.my. 20 May 2017. Archived from the original on 19 May 2017. Retrieved 20 May 2017.
  2. ^ "Astonishing facts". proton.com. 5 August 2007. Archived from the original on 5 August 2007. Retrieved 20 May 2017.
  3. ^ Anthony Lim (21 January 2017). "Holistic growth for automotive industry in 2017 – MAI". Driven Communications. Archived from the original on 19 May 2017. Retrieved 20 May 2017.
  4. ^ a b c d e f John H. Drabble (31 July 2004). "Economic History of Malaysia". eh.net. Archived from the original on 24 February 2017. Retrieved 24 February 2017.
  5. ^ a b c d e f Shakila Yacob (2008). The United States and the Malaysian Economy. Routledge. pp. 117–118. ISBN 978-0-203-92721-2. Retrieved 28 February 2017.
  6. ^ a b c Shakila Yacob (2008). The United States and the Malaysian Economy. Routledge. pp. 122–123. ISBN 978-0-203-92721-2. Retrieved 13 March 2017.
  7. ^ a b c d Shakila Yacob (2008). The United States and the Malaysian Economy. Routledge. p. 139. ISBN 978-0-203-92721-2. Retrieved 28 February 2017.
  8. ^ a b "Malayan ban on U.S. cars". The Singapore Free Press. 14 June 1948. Retrieved 10 March 2017.
  9. ^ a b c Shakila Yacob (2008). The United States and the Malaysian Economy. Routledge. p. 130. ISBN 978-0-203-92721-2. Retrieved 28 February 2017.
  10. ^ Shakila Yacob (2008). The United States and the Malaysian Economy. Routledge. p. 122. ISBN 978-0-203-92721-2. Retrieved 28 February 2017.
  11. ^ a b c d e f g h i j k l Kartini Saparudin & Nor-Afidah Abd Rahman (5 November 2007). "Ford Motor Company of Malaya (Ford Malaya)". National Library Board Singapore. Archived from the original on 27 February 2017. Retrieved 27 February 2017.
  12. ^ a b c "A half century of Ford cars". The Singapore Free Press. 27 September 1957. Retrieved 8 March 2017.
  13. ^ a b c d e Shakila Yacob (2008). The United States and the Malaysian Economy. Routledge. p. 134. ISBN 978-0-203-92721-2. Retrieved 28 February 2017.
  14. ^ a b "Ford at Singapore". The Straits Times. 21 November 1929. Retrieved 10 March 2017.
  15. ^ "General Motors, Ltd. - Proposed assemblage plant". Malaya Tribune. 20 January 1927. Retrieved 10 March 2017.
  16. ^ a b c Bill Bowman (10 March 2017). "GM Indonesia". history.gmheritagecenter.com. Archived from the original on 10 March 2017. Retrieved 10 March 2017.
  17. ^ a b c d Louis F. Fourie (2016). On a Global Mission: The Automobiles of General Motors International Volume 3. FriesenPress. pp. 1131–1132. ISBN 978-1-4602-9690-5. Retrieved 10 March 2017.
  18. ^ a b c "General Motors to employ 1,000 men". The Straits Times. 27 July 1947. Retrieved 10 March 2017.
  19. ^ "Katong Factory Plan Shelved". The Straits Times. 16 August 1948. Retrieved 10 March 2017.
  20. ^ Anthony Oei (19 March 1957). "Europe boosts car exports to Malaya". eresources.nlb.gov.sg. Retrieved 17 September 2020.
  21. ^ a b Rokiah Alavi (1996). Industrialisation in Malaysia: Import Substitution and Infant Industry Performance. Routledge. p. 32. ISBN 0-415-14476-0. Retrieved 28 February 2017.
  22. ^ a b "Malaysia will have its own car industry". The Straits Times. 29 October 1963. Retrieved 4 March 2017.
  23. ^ a b "A joint policy to assemble more cars". The Straits Times. 28 May 1964. Retrieved 5 March 2017.
  24. ^ a b "Cortina 'best selling car'". The Straits Times. 9 June 1964. Retrieved 4 March 2017.
  25. ^ "First motor assembly plant in Malaysia is 38 years old". The Straits Times. 9 February 1964. Retrieved 4 March 2017.
  26. ^ a b Ronald Kinsey (30 October 1963). "That 'Made-in-Malaysia' car must wait a long time". The Straits Times. Retrieved 5 March 2017.
  27. ^ a b c d Richard F. Doner (1991). Driving a Bargain: Automobile Industrialization and Japanese Firms in Southeast Asia. University of California Press. pp. 36. ISBN 0-520-06938-2. Retrieved 5 March 2017.
  28. ^ a b c "Locally built cars: 'Need for a pact...'". The Straits Times. 14 June 1966. Retrieved 10 March 2017.
  29. ^ a b "Vehicles plants: Govt names seven firms". The Straits Times. 11 January 1967. Retrieved 14 March 2017.
  30. ^ a b "Duty on cars put off". The Straits Times. 11 July 1967. Retrieved 6 March 2017.
  31. ^ Paul Jansen (12 January 1980). "Local assembly of cars to stop in 3 years". The Straits Times. Retrieved 4 March 2017.
  32. ^ a b "Motor plant shuts down and axes 300 workers". The Straits Times. 22 July 1980. Retrieved 14 March 2017.
  33. ^ "Swedish Motors invest $3.3 m." eresources.nlb.gov.sg. 17 February 1968. Retrieved 20 August 2020.
  34. ^ a b c "ASSEMBLY OF CARS: 'NO MORE' DECISION". eresources.nlb.gov.sg. 4 May 1968. Retrieved 20 August 2020.
  35. ^ "ASSEMBLY PLANT PERFORMANCE". eresources.nlb.gov.sg. 28 July 1971. Retrieved 20 August 2020.
  36. ^ a b c "Sultan opens Johore Fiat assembly plant". The Straits Times. 27 February 1968. Retrieved 6 March 2017.
  37. ^ a b c "Batu Tiga plant to assemble buses, too". The Straits Times. 30 March 1971. Retrieved 6 March 2017.
  38. ^ a b c d e f g h "Dr. Lim to open first motor assembly plant in Malaysia". The Straits Times. 17 February 1968. Retrieved 16 June 2017.
  39. ^ a b c d e f g h "Symbol of faith". eresources.nlb.gov.sg. 27 May 1968. Retrieved 28 October 2017.
  40. ^ a b Soh Tiang Keng (8 March 1969). "Tampoi factory turns out 10 cars daily". eresources.nlb.gov.sg. Retrieved 20 August 2020.
  41. ^ a b c Lee P.S. (4 June 1989). "Rust Busters". news.google.com. Retrieved 5 September 2017.
  42. ^ "First off line at Batu Tiga assembly plant". The Straits Times. 2 August 1968. Retrieved 6 March 2017.
  43. ^ a b c d "THE FIRST CAR OFF THE LINE". eresources.nlb.gov.sg. 12 June 1968. Retrieved 20 August 2020.
  44. ^ a b c d e "Sa-buah lagi kilang pemasang motokar di-buka". eresources.nlb.gov.sg (in Malay). 23 November 1968. Retrieved 16 August 2020.
  45. ^ a b "New car sales rise by 33pc". eresources.nlb.gov.sg. 27 February 1981. Retrieved 16 August 2020.
  46. ^ Kōnosuke Odaka; Chee Peng Lim; Fong Chan Onn (1983). The Motor Vehicle Industry in Asia: A Study of Ancillary Firm Development. Singapore University Press. p. 109. ISBN 9971-69-057-8. Retrieved 14 March 2017.
  47. ^ a b c d e f g h i j k Chips Yap (16 September 2012). "The Tan Chong story". motortrader.com.my. Archived from the original on 4 January 2016. Retrieved 11 March 2017.
  48. ^ a b B.C. Bhattacharjee (6 April 1980). "New style but old ways ..." New Straits Times. Retrieved 11 March 2017.
  49. ^ a b c Henry Chang (4 February 1972). "Malaysia's car sales move into top gear". The Straits Times. Retrieved 14 March 2017.
  50. ^ a b "Passenger car sales in West Malaysia drop". Business Times. 15 January 1983. Retrieved 14 March 2017.
  51. ^ a b c Kōnosuke Odaka; Chee Peng Lim; Fong Chan Onn (1983). The Motor Vehicle Industry in Asia: A Study of Ancillary Firm Development. Singapore University Press. pp. 96–98. ISBN 9971-69-057-8. Retrieved 14 March 2017.
  52. ^ "SALES & PRODUCTION STATISTICS". MALAYSIAN AUTOMOTIVE ASSOCIATION (MAA).
  53. ^ a b "Malaysian Automotive Association". www.maa.org.my. 20 February 2020. Retrieved 20 February 2020.
  54. ^ a b c Anthony Lim (27 January 2021). "Vehicle sales performance in Malaysia, 2020 vs 2019 – all the numbers, and how the brands fared last year". paultan.org. Archived from the original on 16 February 2021. Retrieved 16 February 2021.
  55. ^ a b Henry Chang (29 January 1971). "West Malaysia's motor industry slips into low gear". eresources.nlb.gov.sg. Retrieved 4 July 2020.
  56. ^ "Lean year for car sales, but no cause for complain". news.google.com. 26 February 1976. Retrieved 12 August 2020.
  57. ^ a b "Toyota keeps the lead as best seller". eresources.nlb.gov.sg. 11 February 1977. Retrieved 4 July 2020.
  58. ^ "Furore over Toyota franchise in Malaysia". eresources.nlb.gov.sg. 30 June 1981. Retrieved 26 July 2020.
  59. ^ "Fair performance by Malaysian motor industry". eresources.nlb.gov.sg. 3 February 1982. Retrieved 16 August 2020.
  60. ^ Takashi Torii (December 1991). "Changing the Manufacturing Sector, Reorganizing Automobile Assemblers, and Developing the Auto Component Industry Under the New Economic Policy" (PDF). www.ide.go.jp. Archived (PDF) from the original on 20 August 2020. Retrieved 22 August 2020.
  61. ^ "1999 MALAYSIAN CAR SALES FIGURES". www.autoworld.com.my. Archived from the original on 5 May 2009. Retrieved 7 August 2020.
  62. ^ "2000 MALAYSIAN CAR SALES FIGURES". www.autoworld.com.my. Archived from the original on 18 April 2009. Retrieved 7 August 2020.
  63. ^ Chips Yap (30 January 2002). "16% Growth in Vehicle Sales in 2001". autoworld.com.my. Archived from the original on 19 May 2015. Retrieved 30 July 2020.
  64. ^ "2001 MALAYSIAN CAR SALES FIGURES". www.autoworld.com.my. Archived from the original on 19 June 2009. Retrieved 7 August 2020.
  65. ^ Chips Yap (27 January 2003). "2002 New Vehicle Sales in Malaysia". autoworld.com.my. Archived from the original on 4 June 2015. Retrieved 30 July 2020.
  66. ^ "2002 MALAYSIAN CAR SALES FIGURES". www.autoworld.com.my. Archived from the original on 19 June 2009. Retrieved 7 August 2020.
  67. ^ a b Matt Gasnier (9 March 2020). "Malaysia: 1985-2019 Historical Data available". bestsellingcarsblog.com. Retrieved 9 March 2020.
  68. ^ "Fewer car buyers in Malaysia". eresources.nlb.gov.sg. 22 February 1985. Retrieved 15 August 2020.
  69. ^ "WIRA, BEST SELLING CAR IN 1996". blis.bernama.com. 30 January 1997. Archived from the original on 16 July 2020. Retrieved 17 July 2020.
  70. ^ Matt Gasnier (28 January 2008). "Malaysia 2006-2007: Perodua Myvi takes control of the market". bestsellingcarsblog.com. Archived from the original on 9 September 2011. Retrieved 13 July 2020.
  71. ^ Matt Gasnier (28 January 2010). "Malaysia 2008-2009: Perodua Myvi, Viva & Proton Saga on podium". bestsellingcarsblog.com. Archived from the original on 18 October 2011. Retrieved 13 July 2020.
  72. ^ Matt Gasnier (13 February 2012). "Malaysia Full Year 2011: Perodua Myvi and Proton Saga rule". bestsellingcarsblog.com. Archived from the original on 31 October 2012. Retrieved 13 July 2020.
  73. ^ Matt Gasnier (30 May 2012). "Malaysia April 2012: Proton Prevé makes its first appearance". bestsellingcarsblog.com. Archived from the original on 31 October 2012. Retrieved 13 July 2020.
  74. ^ Uli Kaiser (22 May 2016). "Malaysia Automotive Statistics Full Year 2013 by Model". www.slideshare.net. Archived from the original on 5 August 2020. Retrieved 5 August 2020.
  75. ^ "Malaysia best selling car. The top in 2015". www.focus2move.com. 17 March 2016. Archived from the original on 14 July 2020. Retrieved 14 July 2020.
  76. ^ "Malaysia best selling cars 2016. Perodua monopolizes the podium". www.focus2move.com. 15 March 2017. Archived from the original on 14 July 2020. Retrieved 14 July 2020.
  77. ^ Chips Yap (31 July 2019). "The Top 30 Bestsellers In Malaysia In The First Half Of 2018". www.piston.my. Archived from the original on 14 July 2020. Retrieved 14 July 2020.
  78. ^ Danny Tan (5 August 2020). "Perodua Myvi, Axia and Bezza are the top 3 best selling cars in 2020 – 42% share for the market leader". paultan.org. Archived from the original on 5 August 2020. Retrieved 5 August 2020.
  79. ^ "Transport Statistics Malaysia 2014" (PDF). mot.gov.my. Ministry of Transport Malaysia. 2015. p. 14. Retrieved 2 February 2019.
  80. ^ Bin Azmi, Muhammad (22 March 2017). "Policy Planning and Environmental Burden Estimation for Passenger Vehicle Ownership in Malaysia using System Dynamics Modeling Method". 大阪大学: 45. doi:10.18910/61777. hdl:11094/61777. {{cite journal}}: Cite journal requires |journal= (help)
  81. ^ Bin Azmi, Muhammad; ビン, アズミ (2017). "マルチプルレゾリューション - JaLC". japanlinkcenter.org. doi:10.18910/61777. Retrieved 7 February 2019.
  82. ^ a b Chips Yap (28 September 2016). "The all-new Proton Saga Generation 3 is launched". motortrader.com.my. Archived from the original on 8 January 2017. Retrieved 8 January 2017.
  83. ^ "PROTON Holdings Berhad - Shah Alam Plant - Capacity". corporate.proton.com. 17 January 2017. Archived from the original on 22 September 2015. Retrieved 17 January 2017.
  84. ^ "PROTON Holdings Berhad - Tanjung Malim Plant - Capacity". corporate.proton.com. 17 January 2017. Archived from the original on 28 January 2017. Retrieved 17 January 2017.
  85. ^ "PROTON Holdings Berhad - Shah Alam Plant - Overview". corporate.proton.com. 17 January 2017. Archived from the original on 31 July 2017. Retrieved 17 January 2017.
  86. ^ "PROTON Holdings Berhad - Tanjung Malim Plant - Overview". corporate.proton.com. 17 January 2017. Archived from the original on 8 August 2017. Retrieved 17 January 2017.
  87. ^ a b "Revving up for localisation". New Straits Times. 9 July 1989. Retrieved 8 January 2017.
  88. ^ a b "Celebrating six successful years made possible through commitment to quality". New Straits Times. 16 July 1991. Retrieved 8 January 2017.
  89. ^ a b Chips Yap (23 August 2001). "Where Wajas Are Made". autoworld.com.my. Retrieved 8 January 2017.
  90. ^ a b c Chips Yap (23 August 2001). "MVF Page 2". autoworld.com.my. Archived from the original on 8 January 2017. Retrieved 8 January 2017.
  91. ^ Chips Yap (23 August 2001). "MVF Page 3". autoworld.com.my. Archived from the original on 8 January 2017. Retrieved 8 January 2017.
  92. ^ a b Chips Yap (23 August 2001). "MVF Page 4". autoworld.com.my. Archived from the original on 8 January 2017. Retrieved 8 January 2017.
  93. ^ a b c d e f Y.S. Khong (11 March 2005). "Proton Tanjung Malim Plant – Building The Next Generation of Cars". autoworld.com.my. Archived from the original on 10 January 2017. Retrieved 10 January 2017.
  94. ^ a b "Perusahaan Otomobil Kedua - Corporate". perodua.com.my. 17 January 2017. Archived from the original on 17 January 2017. Retrieved 17 January 2017.
  95. ^ Vincent De Paul (1 July 1994). "Kancil rolls out today". New Straits Times. Retrieved 16 January 2017.
  96. ^ Azrin Azmi, Alex Choong (29 July 1994). "Bookings are now open for Perodua Kancil". New Straits Times. Retrieved 16 January 2017.
  97. ^ "Kancil off to a great start". New Straits Times / Bernama. 3 August 1994. Retrieved 16 January 2017.
  98. ^ Chips Yap (6 December 2001). "New Era for Perodua". autoworld.com.my. Archived from the original on 16 January 2017. Retrieved 16 January 2017.
  99. ^ Kon Wai Luen (3 April 2014). "Perodua steps up transformation for increased competitiveness". autoworld.com.my. Archived from the original on 16 January 2017. Retrieved 16 January 2017.
  100. ^ Danny Tan (27 December 2012). "Perodua to build new RM790m plant in Rawang, adding 100,000 units to annual production capacity". Driven Communications. Archived from the original on 10 January 2017. Retrieved 10 January 2017.
  101. ^ a b Danny Tan (12 January 2016). "Perodua Global Manufacturing plant officially opened – RM1.3bil EEV factory based on Daihatsu Kyushu". Driven Communications. Archived from the original on 10 January 2017. Retrieved 10 January 2017.
  102. ^ a b Danny Tan (1 December 2013). "Perodua Global Manufacturing plant to mirror Daihatsu Kyushu's best practices, tech and low defect rate". Driven Communications. Archived from the original on 10 January 2017. Retrieved 10 January 2017.
  103. ^ Anthony Lim (29 May 2014). "Perodua to build new engine manufacturing plant". Driven Communications. Archived from the original on 10 January 2017. Retrieved 10 January 2017.
  104. ^ Jonathan Lee (11 July 2015). "Perodua Sendayan engine plant to be ready Q4 2015; P2 mulls supplying powertrains to other carmakers". Driven Communications. Archived from the original on 10 January 2017. Retrieved 10 January 2017.
  105. ^ Danny Tan (8 November 2016). "RM500m Daihatsu Perodua Engine Manufacturing plant officially opens in Sendayan – NR engines". Driven Communications. Archived from the original on 10 January 2017. Retrieved 10 January 2017.
  106. ^ Hans Cheong (8 November 2016). "Perodua Now Supplies 1.5-litre 2NR-FE Dual VVT-i Engines For The Toyota Vios". carlist.my. Archived from the original on 17 January 2017. Retrieved 17 January 2017.
  107. ^ a b Danny Tan (17 June 2015). "Akashi Kikai transmission plant in Sendayan TechValley launched – supplies E-AT, MT to Perodua". Driven Communications. Archived from the original on 10 January 2017. Retrieved 10 January 2017.
  108. ^ "Tan Chong Motor Holdings - History and Business". Tan Chong Motor Holdings. 5 January 2016. Archived from the original on 4 January 2016. Retrieved 5 January 2016.
  109. ^ a b Gerard Lye (26 February 2016). "2016 Subaru Forester CKD production begins in Malaysia – two variants scheduled for Q2 2016 launch". Driven Communications. Archived from the original on 27 March 2016. Retrieved 27 March 2016.
  110. ^ Danny Tan (21 January 2014). "Mitsubishi ASX CKD rolls off TCMA Segambut line". Driven Communications. Archived from the original on 31 December 2015. Retrieved 31 December 2015.
  111. ^ "Models by Country - Malaysia". marklines.com / MAA. 18 December 2016. Retrieved 18 December 2016.
  112. ^ T. Yogendra (19 November 2014). "Tan Chong's Serendah plant first to assemble hybrid MPV in Malaysia". The Rakyat Post. Archived from the original on 31 December 2015. Retrieved 31 December 2015.
  113. ^ a b c d e f "Tan Chong Motor Holdings - Milestones". Tan Chong Motor Holdings. 5 January 2016. Archived from the original on 4 January 2016. Retrieved 5 January 2016.
  114. ^ "CONFIRMED: Renault goes to Tan Chong Motor". autoworld.com.my. 26 May 2003. Archived from the original on 30 December 2015. Retrieved 30 December 2015.
  115. ^ "TC EURO CARS SDN BHD - ABOUT TC EURO CARS". renault.com.my. 30 December 2015. Archived from the original on 30 December 2015. Retrieved 30 December 2015.
  116. ^ Elaine Lim (13 December 1994). "Tan Chong makes dream come true with van exports". New Sunday Times. Retrieved 29 December 2015.
  117. ^ a b c Zainul Arifin (7 November 1989). "MD: Tan Chong ready to export". New Straits Times. Retrieved 24 December 2015.
  118. ^ "Assembly project for Tan Chong". New Straits Times. 7 June 1988. Retrieved 28 December 2015.
  119. ^ Muharyani Othman (20 November 1989). "Holding her own in a male-dominated field". New Straits Times. Retrieved 28 December 2015.
  120. ^ Muharyani Othman (20 November 1989). "Assembly pioneers score for women". New Straits Times. Retrieved 28 December 2015.
  121. ^ a b c Chips Yap (26 July 2008). "Inside Tan Chong Motor's plant in Serendah". motortrader.com.my. Archived from the original on 17 January 2017. Retrieved 17 January 2017.
  122. ^ Danny Tan (19 December 2012). "CKD Subaru XV official roll out at Tan Chong's Segambut plant – 6.5k units per year, 70% for export". Driven Communications. Archived from the original on 31 December 2015. Retrieved 31 December 2015.
  123. ^ a b c Honda Malaysia Sdn. Bhd. (4 September 2016). "Honda Malaysia Sdn. Bhd. fact sheet" (PDF). careta.my. Archived (PDF) from the original on 5 September 2017. Retrieved 5 September 2017.
  124. ^ a b c "Honda Forms RM500 Million Joint-Venture Company with DRB-HICOM and Oriental". autoworld.com.my. 19 July 2000. Archived from the original on 5 September 2017. Retrieved 5 September 2017.
  125. ^ a b c d "DRB-Oriental-Honda Now in Business". autoworld.com.my. 2 July 2001. Archived from the original on 5 September 2017. Retrieved 5 September 2017.
  126. ^ "DOH becomes Honda Malaysia Sdn Bhd". autoworld.com.my. 6 September 2002. Archived from the original on 5 September 2017. Retrieved 5 September 2017.
  127. ^ a b c d "Honda Malaysia's New Factory Ready to Start Operations". autoworld.com.my. 28 November 2002. Archived from the original on 5 September 2017. Retrieved 5 September 2017.
  128. ^ "Work on Honda Plant Begins". autoworld.com.my. 29 August 2001. Archived from the original on 5 September 2017. Retrieved 5 September 2017.
  129. ^ a b "Honda Rolls Out 100,000th Car at Pegoh Plant". autoworld.com.my. 8 November 2007. Archived from the original on 5 September 2017. Retrieved 5 September 2017.
  130. ^ Jonathan James Tan (23 November 2012). "Honda Jazz Hybrid CKD launched, first hybrid to be assembled in Malaysia – RM89,900". paultan.org. Archived from the original on 5 September 2017. Retrieved 5 September 2017.
  131. ^ a b c Jonathan James Tan (17 January 2014). "Honda Malaysia opens No. 2 Line for small and hybrid cars at Pegoh plant to double production capacity". paultan.org. Archived from the original on 5 September 2017. Retrieved 5 September 2017.
  132. ^ a b Anthony Lim (30 March 2017). "Honda Malaysia hits 600,000-unit production milestone". paultan.org. Archived from the original on 9 September 2017. Retrieved 9 September 2017.
  133. ^ a b Chips Yap (20 January 2017). "No. 1 position for Honda in Thailand and Malaysia for two years in a row". motortrader.com.my. Archived from the original on 5 September 2017. Retrieved 5 September 2017.
  134. ^ "Company Overview". inokom.com.my. 28 July 2017. Archived from the original on 28 July 2017. Retrieved 28 July 2017.
  135. ^ David Ong-Yeoh (14 July 1998). "Inokom launches first van" (PDF). library.perdana.org.my. Archived from the original (PDF) on 28 July 2017. Retrieved 28 July 2017.
  136. ^ "Inokom confident of selling 30 one-tonne vans per month". blis2.bernama.com. 8 December 1998. Archived from the original on 28 July 2017. Retrieved 28 July 2017.
  137. ^ "Inokom lancar trak nasional kedua". blis2.bernama.com (in Malay). 7 May 2000. Archived from the original on 28 July 2017. Retrieved 28 July 2017.
  138. ^ a b c d e "Milestones". inokom.com.my. 28 July 2017. Archived from the original on 28 July 2017. Retrieved 28 July 2017.
  139. ^ Mick Chan (3 May 2018). "BMW officially opens Kulim engine assembly plant – RM132mil facility by Sime Darby Auto Engineering". paultan.org. Archived from the original on 21 January 2020. Retrieved 21 January 2020.
  140. ^ Jonathan Lee (4 November 2019). "G30 BMW 520i Luxury assembled in Malaysia now exported to Philippines, priced at RM328,500 – report". paultan.org. Archived from the original on 21 January 2020. Retrieved 21 January 2020.
  141. ^ a b c Chris Ng (7 September 2016). "Take a look inside the oldest car factory in Malaysia Part 1". carmalaysia.my. Archived from the original on 14 June 2017. Retrieved 14 June 2017.
  142. ^ a b c Jonathan Lee (22 January 2020). "Volvo sold 1,883 vehicles in Malaysia in 2019, up 36.1%; over 3,000 units exported to ASEAN and Taiwan". paultan.org. Archived from the original on 24 January 2020. Retrieved 24 January 2020.
  143. ^ "Malaysia's first Volvo rolls out". The Straits Times. 15 December 1967. Retrieved 16 June 2017.
  144. ^ M. Krishnamoorthy (22 August 1992). "Taking the assembly line to the highway of success". news.google.com. Retrieved 22 September 2017.
  145. ^ Daniel Fleming; Arne Wangel (1993). Nordic management in Malaysia. Nordic Council of Ministers. p. 24. ISBN 92-9120-396-3. Retrieved 22 September 2017.
  146. ^ a b Daniel Khoo (20 October 2012). "Volvo chooses Malaysia as Asean manufacturing hub". The Star Online. Archived from the original on 21 October 2012. Retrieved 14 June 2017.
  147. ^ "Volvo Malaysia appoints Mark Hallum as managing director". The Star Online. 17 July 2013. Archived from the original on 14 June 2017. Retrieved 14 June 2017.
  148. ^ Joakim Persson (25 July 2017). "Volvo Car Manufacturing marks long-term commitment for its Malaysia plant". scandasia.com. Archived from the original on 22 September 2017. Retrieved 22 September 2017.
  149. ^ a b c "UMW Holdings Berhad - Corporate presentation - March 2017" (PDF). ir.chartnexus.com. March 2017. Archived (PDF) from the original on 8 October 2017. Retrieved 8 October 2017.
  150. ^ a b c Gokul Kandiah (24 January 2019). "New Vios Becomes First Model To Be Produced In Toyota Assembly Plant In Klang". carlist.my. Archived from the original on 26 February 2019. Retrieved 26 February 2019.
  151. ^ a b c d e f g Chips Yap (26 April 2011). "1 million vehicles produced by ASSB". motortrader.com.my. Archived from the original on 28 October 2017. Retrieved 28 October 2017.
  152. ^ "First Japan cars arrive". eresources.nlb.gov.sg. 6 September 1957. Retrieved 24 October 2017.
  153. ^ "Asia Motor Toyota advertisement". eresources.nlb.gov.sg. 22 August 1958. Retrieved 24 October 2017.
  154. ^ "Kah Motor Toyopet advertisement". eresources.nlb.gov.sg. 26 June 1961. Retrieved 24 October 2017.
  155. ^ "Toyota in Malaysia". eresources.nlb.gov.sg. 24 December 1963. Retrieved 24 October 2017.
  156. ^ "Toyota cars assembly plant to be set up in Penang". eresources.nlb.gov.sg. 24 February 1964. Retrieved 24 October 2017.
  157. ^ Chips Yap (21 November 2011). "Chevrolet joins the '100 Year' club". motortrader.com.my. Archived from the original on 28 October 2017. Retrieved 28 October 2017.
  158. ^ "Borneo Motors to stop selling Austins". eresources.nlb.gov.sg. 17 June 1967. Retrieved 28 October 2017.
  159. ^ Lee Yew Meng (26 March 1974). "Three-firm merger gives a big boost to Inchcape". eresources.nlb.gov.sg. Retrieved 28 October 2017.
  160. ^ "Champion Motors Volkswagen advertisement (1969)". eresources.nlb.gov.sg. 20 December 1969. Retrieved 16 August 2020.
  161. ^ "Toyota Motor pact". eresources.nlb.gov.sg. 2 February 1978. Retrieved 16 August 2020.
  162. ^ a b Chips Yap (14 July 2010). "Toyota Camry to be assembled here again". motortrader.com.my. Archived from the original on 28 October 2017. Retrieved 28 October 2017.
  163. ^ Steven Tan (31 August 1981). "UMW looks certain to get Toyota franchise". eresources.nlb.gov.sg. Retrieved 28 October 2017.
  164. ^ "Man behind Toyota coup". eresources.nlb.gov.sg. 23 September 1981. Retrieved 24 October 2017.
  165. ^ Koh Tse Ying (9 December 1981). "Inchcape gives up Toyota in M'sia". eresources.nlb.gov.sg. Retrieved 28 October 2017.
  166. ^ Chips Yap (24 September 2013). "Toyota Boshoku UMW Sdn Bhd (TBU) opens third plant in Malaysia". motortrader.com.my. Archived from the original on 28 October 2017. Retrieved 28 October 2017.
  167. ^ a b c d e "Manufacturing". goauto.com.my. 2017. Archived from the original on 2 November 2017. Retrieved 2 November 2017.
  168. ^ "Our Profile". goauto.com.my. 2017. Archived from the original on 2 November 2017. Retrieved 2 November 2017.
  169. ^ a b Danny Tan (30 July 2011). "Great Wall Motor comes to Malaysia – Haval diesel SUV at RM120k, Wingle pick-up truck starts from RM59,888!". paultan.org. Archived from the original on 2 November 2017. Retrieved 2 November 2017.
  170. ^ a b Chips Yap (7 August 2011). "Great Wall comes to Malaysia". motortrader.com.my. Archived from the original on 2 November 2017. Retrieved 2 November 2017.
  171. ^ a b c d e Kon Wai Luen (9 April 2014). "EEV Manufacturing License issued to Go Automobile Manufacturing". autoworld.com.my. Archived from the original on 2 November 2017. Retrieved 2 November 2017.
  172. ^ Oh Chin Eng (27 January 2015). "GoAuto to invest RM250m in Gurun". thestar.com.my. Archived from the original on 2 November 2017. Retrieved 2 November 2017.
  173. ^ a b c d e Kensomuse (16 September 2016). "Malaysia Day Special – How To Build Value With Low Investments: Go Auto Manufacturing Sdn Bhd (GAM)". kensomuse.com. Archived from the original on 2 November 2017. Retrieved 2 November 2017.
  174. ^ a b c "HICOM Automotive Manufacturers (Malaysia) - Core Business". hicom-automotive.com.my. 2017. Archived from the original on 5 January 2018. Retrieved 5 January 2018.
  175. ^ Chips Yap (24 November 2017). "Isuzu HICOM Malaysia plant in Pahang celebrates 10th anniversary". motortrader.com.my. Archived from the original on 24 December 2017. Retrieved 24 December 2017.
  176. ^ a b c d e f g h "HICOM Automotive Manufacturers (Malaysia) - Milestones". hicom-automotive.com.my. 2017. Archived from the original on 5 January 2018. Retrieved 5 January 2018.
  177. ^ a b c d Chips Yap (26 February 2013). "The history of Citroen in Malaysia". motortrader.com.my. Archived from the original on 24 December 2017. Retrieved 24 December 2017.
  178. ^ a b c "Expanding vehicle assembly line". news.google.com. 28 December 1994. Retrieved 25 December 2017.
  179. ^ a b c d Azran Aziz (15 November 1995). "AMM aims to be world player". news.google.com. Retrieved 25 December 2017.
  180. ^ "MTB is ready for AFTA". autoworld.com.my. 5 July 2000. Archived from the original on 4 January 2018. Retrieved 4 January 2018.
  181. ^ a b "Saga of Another Kind". autoworld.com.my. 17 February 2004. Archived from the original on 4 January 2018. Retrieved 4 January 2018.
  182. ^ a b "Last Citroen Being Assembled at AMM". autoworld.com.my. 23 June 2000. Archived from the original on 4 January 2018. Retrieved 4 January 2018.
  183. ^ a b Zuraimi Abdullah (15 October 2001). "Naza surges ahead with Spectra". news.google.com. Retrieved 25 December 2017.
  184. ^ Kon Wai Luen (30 January 2013). "Mercedes-Benz Malaysia marks 10 years in business". autoworld.com.my. Archived from the original on 4 January 2018. Retrieved 4 January 2018.
  185. ^ a b Sidek Kamiso (19 May 2004). "DRB-HICOM unit, DaimlerChrysler sign MoU". thestar.com.my. Archived from the original on 5 January 2018. Retrieved 5 January 2018.
  186. ^ "DaimlerChrysler moves to Pekan". news.google.com. 17 October 2004. Retrieved 25 December 2017.
  187. ^ Y.S. Khong (1 March 2005). "MTB-DaimlerChrysler joint venture assembly hub rolls out first Mercedes-Benz". autoworld.com.my. Archived from the original on 4 January 2018. Retrieved 4 January 2018.
  188. ^ "DaimlerChrysler Malaysia is renamed Mercedes-Benz Malaysia". autoworld.com.my. 2 January 2008. Archived from the original on 4 January 2018. Retrieved 4 January 2018.
  189. ^ a b Chips Yap (6 October 2017). "Cumulative investments by Mercedes-Benz Malaysia have exceeded RM1 billion". motortrader.com.my. Archived from the original on 24 December 2017. Retrieved 24 December 2017.
  190. ^ a b Mick Chan (23 August 2019). "Mercedes-Benz Malaysia rolls out 100,000th car from Pekan plant, celebrates 15 years at expanded facility". paultan.org. Archived from the original on 24 January 2020. Retrieved 24 January 2020.
  191. ^ a b Chips Yap (13 June 2007). "Suzuki Swift now assembled locally". motortrader.com.my. Archived from the original on 24 December 2017. Retrieved 24 December 2017.
  192. ^ Chips Yap (15 February 2008). "Suzuki takes 40% stake in Suzuki Malaysia". motortrader.com.my. Archived from the original on 24 December 2017. Retrieved 24 December 2017.
  193. ^ Kon Wai Luen (14 May 2013). "Suzuki Swift now available as a CKD model". autoworld.com.my. Archived from the original on 4 January 2018. Retrieved 4 January 2018.
  194. ^ Chips Yap (23 March 2015). "Inside Volkswagen's assembly operation in Pekan". motortrader.com.my. Archived from the original on 24 December 2017. Retrieved 24 December 2017.
  195. ^ Chips Yap (21 October 2014). "Volkswagen plans to export cars from Malaysia from next year". motortrader.com.my. Archived from the original on 24 December 2017. Retrieved 24 December 2017.
  196. ^ a b c Anthony Lim (4 October 2018). "New national car to roll out in 2020 – model name to be revealed by end of 2018, prototype out early next year". paultan.org. Archived from the original on 5 October 2018. Retrieved 5 October 2018.
  197. ^ a b c d Anthony Lim (4 October 2018). "New national car targeted to be semi-autonomous, safe and cheap – Cyberjaya possible testing ground". paultan.org. Archived from the original on 5 October 2018. Retrieved 5 October 2018.
  198. ^ a b c Anthony Lim (9 August 2019). "Government names DreamEdge as lead company for new national car – technology support from Daihatsu". paultan.org. Archived from the original on 21 January 2020. Retrieved 21 January 2020.
  199. ^ a b Anthony Lim (9 December 2019). "New national car launch delayed to 2022 – DreamEdge to invest up to RM1 bil, targets 3,000 units a month". paultan.org. Archived from the original on 21 January 2020. Retrieved 21 January 2020.